Sir,
In FAST, Is it possible to conduct Static pushover analysis to check the nonlinear behavior of monopile supported offshore wind turbine? I want to check the linear & nonlinear deformation at the tower top.
Thank you.
Static Pushover Analysis
Moderator: Bonnie.Jonkman
-
Dhaneesh.Machavarapu
- Posts: 61
- Joined: Sat Feb 29, 2020 9:56 am
- Organization: NITcalicut
- Location: INDIA
-
Jason.Jonkman
- Posts: 5744
- Joined: Thu Nov 03, 2005 4:38 pm
- Location: Boulder, CO
- Contact:
Re: Static Pushover Analysis
Dear Dhaneesh,
Not directly, but I'm sure this would be possible with a small change to the source code, e.g, by introducing a slowly increasing force applied to the tower top.
Best regards,
Not directly, but I'm sure this would be possible with a small change to the source code, e.g, by introducing a slowly increasing force applied to the tower top.
Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Senior Engineer | National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Who is online
Users browsing this forum: No registered users and 1 guest