Dear Bonnie.Jonkman
Hello. When I use Openfast V2.0.0 to output the animation of the calculation result, The FAST stopped because of a syntax error. Could you help me to solve this problem? The detail of error and .fst file are shown in the figures
Thank you
A syntax error during visualization used by OpenFaxt V 2.0.0
Moderators: Bonnie.Jonkman, Jason.Jonkman
-
- Posts: 4
- Joined: Thu Nov 07, 2019 8:26 pm
- Organization: Harbin Engineering University
- Location: China
A syntax error during visualization used by OpenFaxt V 2.0.0
- Attachments
-
- 问题2.png (30.06 KiB) Viewed 117 times
-
- 问题1.png (39.39 KiB) Viewed 117 times
-
- Posts: 4394
- Joined: Thu Nov 03, 2005 4:38 pm
- Location: Boulder, CO
- Contact:
Re: A syntax error during visualization used by OpenFaxt V 2.0.0
Dear JiYuan.Men,
Have you tried upgrading to OpenFAST v2.2? There was a bug associated with WrVTK that was recently fixed: https://github.com/OpenFAST/openfast/issues/250.
Best regards,
Have you tried upgrading to OpenFAST v2.2? There was a bug associated with WrVTK that was recently fixed: https://github.com/OpenFAST/openfast/issues/250.
Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Senior Engineer | National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Return to “Computer-Aided Engineering Software Tools”
Who is online
Users browsing this forum: No registered users and 1 guest