Wind Veer Parameter

Discuss the effects of turbulence on wind turbines and its simulation.

Moderator: Bonnie.Jonkman

Abhi.Kesbhat
Posts: 1
Joined: Thu Aug 01, 2019 5:23 pm
Organization: Sandia National Lab
Location: New Mexico

Wind Veer Parameter

Postby Abhi.Kesbhat » Wed Aug 07, 2019 4:31 pm

Hi, I am trying to recreate the following study for a turbine at SWiFT:

"Assessment of Wind Parameter Sensitivity on Ultimate and Fatigue Wind Turbine Loads: Robertson, Sethuraman, Jonkman, Quick (2018)".

I will be using TurbSim -> OpenFAST and examining different parameters than those in the above study, but I did want to examine veer (β in the paper). I grepped all the input files and found nothing. I also didn't find anything in the TurbSim Manual. How can I change the veer for these simulations?

Thanks!
-Abhi

Jason.Jonkman
Posts: 4191
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:

Re: Wind Veer Parameter

Postby Jason.Jonkman » Wed Aug 07, 2019 4:47 pm

Dear Abhi,

In TurbSim v2 and TurbSim within OpenFAST, the veer (change in wind direction with height) can be specified using the user-defined wind profile option (WindProfileType="USR").

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov


Return to “Inflow Turbulence”

Who is online

Users browsing this forum: No registered users and 0 guests