somehow Turbsim will show me a severe error while running with User time series. Everything workes normally when nComp in the User Time Series file is set to 3 with a constant w=0.
Unfortunately, as soon as I set nComp to 2 (since I only have u and v components in my input file), TurbSim tells me the followiing after startup:
Code: Select all
Running TurbSim (v2.00.07a-bjj, 14-Jun-2016).
Reading the input file "TurbSim.inp".
Reading the user-defined time-series input file ".\Messpunkt01.inp".
forrtl: severe (157): Program Exception - access violation
Image PC Routine Line Source
TurbSim_x64.exe 00007FF7817EEB5B Unknown Unknown Unknown
TurbSim_x64.exe 00007FF781709AA3 Unknown Unknown Unknown
TurbSim_x64.exe 00007FF7817409D5 Unknown Unknown Unknown
TurbSim_x64.exe 00007FF781D9D2E6 Unknown Unknown Unknown
TurbSim_x64.exe 00007FF7822C7E9C Unknown Unknown Unknown
KERNEL32.DLL 00007FFD3B6A4034 Unknown Unknown Unknown
ntdll.dll 00007FFD3DF63691 Unknown Unknown Unknown
Is there a way to solve this problem? With nComp=3 the programm is working quiet well, but since in real life w-velocity values will never be zero for a longer period, it would probably be better simulating without a w-value in the input file.
Thank you guys so much in advance and
greetings from Germany
Jan Spitzer