FlORIS vs SOWFA

This forum is for discussion of FLORIS

Moderators: Bonnie.Jonkman, Jason.Jonkman, Rafael.Mudafort, Paul.Fleming, Jennifer.Annoni

Anton.Andriyanov
Posts: 8
Joined: Fri Mar 24, 2017 3:14 pm
Organization: AWS Truepower
Location: New York

FlORIS vs SOWFA

Postby Anton.Andriyanov » Fri Feb 01, 2019 9:53 am

Hello,

I came across these two tools, from the presentations on the web, it seems to me that they do exactly the same. Is it true?
SOWFA seems to be geared towards offshore but since FLORIS does not account for terrain roughness, would it make them the same?

Also, in I understand that FLORIS only can plot/calculate/optimize for one wind speed and one direction. Is there a program that I could couple with FLORIS or some code modification (I'm not skilled in coding but can do some simple software changes) that could allow me to plot the wakes resulting from the entire wind rose? For example, running the code in a loop and get the data for each direction and then plot them all together in the same figure.
Thank you.

Kind regards,

Anton

Jason.Jonkman
Posts: 4223
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:

Re: FlORIS vs SOWFA

Postby Jason.Jonkman » Fri Feb 01, 2019 12:50 pm

Dear Anton,

While FLORIS and SOWFA can both be used to predict the power performance of wind turbines in a wind farm, the tools themselves are quite different. FLORIS is a low-fidelity steady-state model with simplifying assumptions that allow it to run practically instantaneously. SOWFA is a high-fidelity dynamics model based on large-eddy simulation computational fluid dynamics (LES CFD) with a high computational resource demand.

Yes, scripts can be generated to run FLORIS many times to model the entire wind rose.

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov


Return to “FLORIS”

Who is online

Users browsing this forum: No registered users and 0 guests