Inhomogen turbulent windfield

Provide feedback, request enhancements, and get help with wind-turbine computer-aided engineering tools.

Moderators: Bonnie.Jonkman, Jason.Jonkman

Simon.Wiedemann
Posts: 69
Joined: Mon Jan 09, 2017 1:00 am
Organization: Ruhr-Uni Bochum
Location: Germany - Bochum

Inhomogen turbulent windfield

Postby Simon.Wiedemann » Tue Jan 16, 2018 5:18 am

Hello all,

is it possible to create inhomogen turbulent windfields somehow?

Aim is to simulate the loads of a turbine that is partly in the wake of an other turbine. This should be done ideally by reduced windspeed and or turbulence in a part of the wind field.

Best regards,

Simon Wiedemann

Jason.Jonkman
Posts: 3999
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:

Re: Inhomogen turbulent windfield

Postby Jason.Jonkman » Wed Jan 17, 2018 1:03 am

Dear Simon,

The TurbSim preprocessor for FAST (https://nwtc.nrel.gov/TurbSim) can be used to generate full-field stochastic inflow turbulence to drive the aerodynamic loading of wind turbines. However, TurbSim does not specifically account for the wakes from upstream wind turbines.

The release of our new FAST.Farm tool for modeling fully wind farms, including all wind turbines and wake/array effects is expected later this spring.

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

Arnold.Ramsland
Posts: 5
Joined: Fri Oct 23, 2015 9:27 am
Organization: Ramsland Technology, LLC
Location: North Carolina

Re: Inhomogen turbulent windfield

Postby Arnold.Ramsland » Wed Apr 17, 2019 11:35 am

Hello,
I would expect that FAST.Farm will require a significant increase in computing power. If so, do you have a recommendation for the type of computer that will be necessary?

Also, I noted in your response of Jan 17, 2018 the following statement: "the release of our new FAST.Farm tool for modeling fully wind farms, including all wind turbines and wake/array effects is expected later this spring".

Will the user be able to store the FAST.Farm calculated wind profile at each location in the wind farm as a separate wind file in .bts or .wnd format)?

Best regards,

Arnold Ramsland

Jason.Jonkman
Posts: 3999
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:

Re: Inhomogen turbulent windfield

Postby Jason.Jonkman » Wed Apr 17, 2019 7:45 pm

Dear Arnold,

FAST.Farm can be compiled and run in serial or parallel mode. Parallelization has been implemented in FAST.Farm through Open Multi-Processing (OpenMP), which allows FAST.Farm to take advantage of multi-core computers by dividing computational tasks among the cores/threads within a node (but not between nodes) to speed up a single simulation. In parallel mode, each wind turbine (each instance of OpenFAST) can be run in parallel on separate threads at the same time the ambient wind is being read in another thread. Thus, the fastest simulations require at least one more core than the number of wind turbines in the wind farm.

I'm not sure what you mean by "wind profile", but FAST.Farm can output the ambient and disturbed wind (including wakes) at specified points throughout the domain. Further, to visualize the ambient wind and wake interactions across the wind farm, FAST.Farm includes visualization capability through the generation of output files in VTK format. The VTK files generated by FAST.Farm can be read with standard open-source visualization packages such as ParaView or VisIt.

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov


Return to “Computer-Aided Engineering Software Tools”

Who is online

Users browsing this forum: No registered users and 1 guest