Turbsim 1.50

Provide feedback, request enhancements, and get help with wind-turbine computer-aided engineering tools.

Moderators: Bonnie.Jonkman, Jason.Jonkman

Post Reply
Boubekeur.Boukhezzar
Posts: 2
Joined: Sun May 26, 2019 11:35 am
Organization: University of Constantine 1
Location: Algeria

Turbsim 1.50

Postby Boubekeur.Boukhezzar » Sun Jul 21, 2019 10:47 am

Hello everybody,

Is Turbsim 1.50 still downloadable ?

The input files for Tubsim provided with FAST 8 are for Turbsim 1.50, however I can only found Turbsim 1.06 on the download page https://nwtc.nrel.gov/TurbSim

Thank you
Boubekeur Boukhezzar
Top
Jason.Jonkman
Posts: 5428
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:
Contact Jason.Jonkman

Re: Turbsim 1.50

Postby Jason.Jonkman » Mon Jul 22, 2019 7:03 am

Dear Boubekeur,

Despite the odd numbering, TurbSim v1.06.00 replaced TurbSim v1.50 (what used be one digit was changed to two digits, and decimals where added, i.e. 5 -->06). The v1.50 input files should be compatible with v1.06.00. See the bottom of the TurbSim Change Log for details on the update: https://nwtc.nrel.gov/system/files/Chan ... urbSim.txt.

I hope that helps.

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Top
Boubekeur.Boukhezzar
Posts: 2
Joined: Sun May 26, 2019 11:35 am
Organization: University of Constantine 1
Location: Algeria

Re: Turbsim 1.50

Postby Boubekeur.Boukhezzar » Mon Jul 22, 2019 7:35 am

Thank you Jason
Boubekeur
Top
Post Reply

Return to “Computer-Aided Engineering Software Tools”

Who is online

Users browsing this forum: No registered users and 1 guest