FF wind array boundaries violated

This forum is for discussion of the WIND Toolkit

Moderators: Bonnie.Jonkman, Jason.Jonkman, Caroline.Draxl

Posts: 1
Joined: Mon Sep 18, 2017 10:48 pm
Organization: NITK
Location: INDIA

FF wind array boundaries violated

Postby Rony.j.s » Sat Jun 29, 2019 8:59 am

Respected Sir,
I am a beginner in the Field of aero-servo-hrdro-elastic simulation. I have encountered an error while simulating results using FAST platform. Please do help me to sort this out.
I have attached a file showing error on wind array boundaries. I have tried different combination of grid height and grid width. But I am receiving the same error.
error2.jpg (186.11 KiB) Viewed 3830 times

Posts: 5975
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO

Re: FF wind array boundaries violated

Postby Jason.Jonkman » Sat Jun 29, 2019 11:03 am

Dear Rony,

An array regarding "wind array boundaries violated has been discussed many times on this forum. Please use "Search..." in the upper-right corner to see how others have solved this issue.

You haven't stated what floating offshore wind turbine model you are using--if you are using a model NREL has provided or if you have made your own. Does it make sense for an aerodynamic analysis node of this turbine to be above 170 m above mean sea level?

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901

Return to “WIND Toolkit”

Who is online

Users browsing this forum: No registered users and 1 guest