National Renewable Energy Laboratory (NREL)NREL HomeInnovation for Our Energy Future

Modeling Workshops

Announcements of new or updated CAE and systems engineering software tools, upcoming and past modeling workshops, and other news.

Moderators: Bonnie.Jonkman, Jason.Jonkman, Katherine.Dykes

Modeling Workshops

Postby Jason.Jonkman » Mon Jun 25, 2012 3:56 pm

Hi,

We will start posting all announcements relating to workshops for all our CAE tools in this topic. Subscribe to this topic to receive email notifications of additions to it. There is a check box on the lower left of this page.
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Jason.Jonkman
 
Posts: 1355
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO

Modeling workshop to be held on 7-Aug-2012

Postby Jason.Jonkman » Mon Jun 25, 2012 4:06 pm

Dear Wind Turbine Modeling Enthusiast,

A workshop on the wind turbine computer-aided engineering (CAE) tools developed by the National Renewable Energy Laboratory (NREL) will be held on August 7 at the University of Massachusetts Amherst in conjunction with the inaugural meeting of the North American Wind Energy Academy (NAWEA). Please see the attached invitation for more information. Registration will be limited to approximately 50 people, and preference will be given to those attending the entire NAWEA meeting. Those interested in attending should submit the registration form included with the attached invitation. Please forward this invitation to those you think would be interested.

Best regards,
Attachments
NAWEA Inaugural Meeting Invitation.pdf
(61.69 KiB) Downloaded 3426 times
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Jason.Jonkman
 
Posts: 1355
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO

Materials from 7-Aug-2012 workshop available

Postby Jason.Jonkman » Mon Aug 13, 2012 11:12 am

Dear All,

On August 7, 2012, I led a Wind Turbine Modeling Workshop at UMass in Amherst, MA. The presentations and sample simulations that were presented at this workshop are now available from: http://wind.nrel.gov/public/jjonkman/Pr ... AmherstMA/. The presentations and sample simulations provide an overview of the NREL-developed CAE tools, with a focus on the capabilities of FAST, AeroDyn, and HydroDyn.

Enjoy!

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Jason.Jonkman
 
Posts: 1355
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO

Workshop for FAST developers to be held 8-Oct-2012

Postby Jason.Jonkman » Fri Aug 24, 2012 9:31 pm

Dear Wind Turbine Modeling Enthusiast,

The National Renewable Energy Laboratory (NREL) in conjunction with the U.S. Department of Energy (DOE) Wind and Water Power Program will be hosting a workshop on the new modularization framework for the FAST wind turbine computer-aided engineering (CAE) tool. This workshop is specifically targeted at participants of the projects funded through DE-FOA-0000415 who are developing new offshore-related features for FAST, but other users of FAST who contribute (or are planning to contribute) to its development are encouraged to attend. This half-day workshop is free and will be held in conjunction with the AWEA OFFSHORE WINDPOWER Conference & Exhibition in Virginia Beach, VA (USA) on October 8, 2012.

More information, including the workshop invitation, agenda, and registration form are attached. Registration will be limited to approximately 50 people, and preference will first be given to DE-FOA-0000415 project participants. We will open up a net-meeting for those who cannot attend in person. Those interested in attending (either in person or by net-meeting) should submit their registration form by September 21.

Best regards,
Attachments
NewFASTModularizationFrameworkWorkshop_RegistrationForm.doc
(42 KiB) Downloaded 3492 times
NewFASTModularizationFrameworkWorkshop_Agenda.pdf
(83.85 KiB) Downloaded 3463 times
NewFASTModularizationFrameworkWorkshop_Invitation.pdf
(98.72 KiB) Downloaded 3398 times
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Jason.Jonkman
 
Posts: 1355
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO

Materials from 8-Oct-2012 workshop available

Postby Jason.Jonkman » Fri Oct 12, 2012 1:04 pm

Dear Wind Turbine Modeling Enthusiast,

On October 8, 2012, we held an NREL/DOE Workshop on the new modularization framework for the FAST wind turbine CAE tool. The presentations given at the workshop are now available from: http://wind.nrel.gov/public/jjonkman/Pr ... iaBeachVA/.

Enjoy!

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Jason.Jonkman
 
Posts: 1355
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO

Modeling workshop to be held on 17-April-2013

Postby Jason.Jonkman » Thu Mar 07, 2013 1:53 pm

Dear Wind Turbine Modeling Enthusiast,

In conjunction with the Wind Energy Institute of Tokyo, the Japan Electrical Manufacturer’s Association (JEMA), and the National Renewable Energy Laboratory (NREL), a workshop on the FAST wind turbine computer-aided engineering (CAE) tool developed by the NREL will be held on April 17, 2013 at the JEMA headquarters in Tokyo, Japan. More information, including a registration form, is available from here:

http://www.jema-net.or.jp/Japanese/info ... 30417.html (in Japanese)
http://translate.google.com/translate?s ... 30417.html (in English)

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Jason.Jonkman
 
Posts: 1355
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO

Materials from 17-April-2013 workshop available

Postby Jason.Jonkman » Wed Apr 24, 2013 9:52 am

Dear Wind Turbine Modeling Enthusiast,

On April 17, 2013 I led a Wind Turbine Modeling Workshop at JEMA in Tokyo, Japan. The presentations and sample simulations that were presented at this workshop are now available from: http://wind.nrel.gov/public/jjonkman/Pr ... okyoJapan/. The presentations and sample simulations provide an overview of the NREL-developed CAE tools, with a focus on the capabilities of FAST, AeroDyn, and HydroDyn.

Enjoy!

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Jason.Jonkman
 
Posts: 1355
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO

Modeling workshop to be held on 9-Aug-2013

Postby Jason.Jonkman » Mon Jun 24, 2013 1:54 pm

Dear Wind Turbine Modeling Enthusiast,

A workshop on the FAST wind turbine computer-aided engineering (CAE) tool developed by the National Renewable Energy Laboratory (NREL) will be held on August 9 at the University of Colorado Boulder. This workshop is being held in conjunction with the 2013 North American Wind Energy Academy (NAWEA) Symposium taking place August 6-8.

To attend the FAST workshop, you must register for the NAWEA Symposium and indicate your desire to attend the workshop on the registration form. Please note that the FAST workshop will be limited to the first 50 registrants. More information, including a registration form, is available here: http://www.nawea.org/2013-symposium/.

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Jason.Jonkman
 
Posts: 1355
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO

Materials from 9-Aug-2013 workshop available

Postby Jason.Jonkman » Wed Aug 14, 2013 5:39 am

Dear Wind Turbine Modeling Enthusiast,

On August 9, 2013 I led a Wind Turbine Modeling Workshop at the University of Colorado in Boulder, Colorado (USA) held in conjunction with the 2013 North American Wind Energy Academy (NAWEA) Symposium. The presentations and sample simulations that were presented at this workshop are now available from: http://wind.nrel.gov/public/jjonkman/Pr ... BoulderCO/. The presentations and sample simulations provide an overview of the NREL-developed CAE tools, with a focus on the capabilities of FAST, AeroDyn, and HydroDyn.

Enjoy!

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Jason.Jonkman
 
Posts: 1355
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO

Modeling workshop to be held on 20-Nov-2013

Postby Jason.Jonkman » Thu Oct 03, 2013 9:54 pm

Dear Wind Turbine Modeling Enthusiast,

In partnership with the Endowed Chair of Wind Energy (SWE) at the University of Stuttgart and the National Renewable Energy Laboratory (NREL), a workshop on the FAST wind turbine computer-aided engineering (CAE) software tool developed by NREL will be held on November 20, 2013 in Frankfurt, Germany. More information, including a registration form, is available from: http://wind.nrel.gov/public/jjonkman/Pr ... rtGermany/.

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Jason.Jonkman
 
Posts: 1355
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO

Materials from 20-Nov-2013 workshop available

Postby Jason.Jonkman » Mon Nov 25, 2013 2:22 pm

Dear Wind Turbine Modeling Enthusiast,

On November 20, 2013 I led a Wind Turbine Modeling Workshop in Frankfurt, Germany held in conjunction with EWEA Offshore. The presentations and sample simulations that were presented at this workshop are now available from: http://wind.nrel.gov/public/jjonkman/Pr ... rtGermany/. The presentations and sample simulations provide an overview of the NREL-developed CAE tools, with a focus on FAST v8.

Enjoy!

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Jason.Jonkman
 
Posts: 1355
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO

Modeling workshop to be held September 11-12, 2014

Postby Jason.Jonkman » Tue May 27, 2014 8:06 pm

Dear Wind Turbine Modeling Enthusiast,

In partnership with the Norwegian Centre for Offshore Wind Energy (NORCOWE) and the National Renewable Energy Laboratory (NREL), a workshop on the FAST wind turbine computer-aided engineering (CAE) software tool developed by NREL will be held on September 11 – 12, 2014 in Bergen, Norway. This workshop is being held in conjunction with the offshore wind conference Science Meets Industry Bergen taking place September 9. More information, including a registration form is available from: http://norcowe.no/index.cfm?id=412931.

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Jason.Jonkman
 
Posts: 1355
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO

Materials from Sep-2014 Modeling Workshop Available

Postby Jason.Jonkman » Mon Sep 15, 2014 3:35 pm

Dear Wind Turbine Modeling Enthusiast,

In partnership with the Norwegian Centre for Offshore Wind Energy (NORCOWE) and the National Renewable Energy Laboratory (NREL), I led a Wind Turbine Modeling Workshop in Bergen, Norway on September 11-12, 2014. The presentations and sample simulations that were presented at this workshop are now available from: http://wind.nrel.gov/public/jjonkman/Pr ... genNorway/. The presentations and sample simulations provide an overview of the NREL-developed CAE tools, with a focus on FAST v8.

Enjoy!

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Jason.Jonkman
 
Posts: 1355
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO

Presentation from Jun-2015 FAST Seminar Available

Postby Jason.Jonkman » Thu Jun 11, 2015 5:27 am

Dear Wind Turbine Modeling Enthusiast,

In conjunction with the North American Wind Energy Academy (NAWEA) 2015 Symposium, I led a pre-conference seminar on June 8, 2015 regarding the FAST wind turbine multi-physics engineering tool. The presentation provides an overview of FAST and outlines the planned transition to an open-source developer community. The presentation from this seminar is now available from here: http://wind.nrel.gov/public/jjonkman/Pr ... onkman.pdf.

Enjoy!

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Jason.Jonkman
 
Posts: 1355
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO


Return to News and Announcements

Who is online

Users browsing this forum: No registered users and 0 guests