Instructions for Compiling FAST

Provide feedback, request enhancements, and get help with wind-turbine computer-aided engineering tools.

Moderators: Bonnie.Jonkman, Jason.Jonkman

Bonnie.Jonkman
Posts: 569
Joined: Thu Nov 10, 2005 10:51 am
Organization: Envision Energy USA
Location: Colorado
Location: Boulder, CO
Contact:

Re: Instructions for Compiling FAST

Postby Bonnie.Jonkman » Tue May 27, 2014 12:12 pm

Hi, Hamid.

Looks like you've also got a newer version of InflowWind than what was used with your version of make_FAST_SFunc.m. You'll need to add HAWCWind.f90 to the list of files to compile. Put it between FFWind.f90 and FDWind.f90:

Code: Select all

    fullfile(WIND_LOC, 'FFWind.f90'                 ), ...
    fullfile(WIND_LOC, 'HAWCWind.f90'               ), ...
    fullfile(WIND_LOC, 'FDWind.f90'                 ), ...
Bonnie Jonkman

Envision Energy USA, 2016-
National Renewable Energy Laboratory, 2003-2016

Hamid.Hokmabady
Posts: 17
Joined: Wed Apr 17, 2013 2:10 am
Organization: University
Location: Iran

Re: Instructions for Compiling FAST

Postby Hamid.Hokmabady » Thu May 29, 2014 12:28 am

Dear Bonnie;
Thanks for all of your great hints!

The problem solved! and I faced a new ONE! Here is the code:

Code: Select all

--> ifort  /Qprec "/IC:\Program Files\MATLAB\R2011a/extern/include" -c -nologo -DMATLAB_MEX_FILE /MD /fp:source /Qvc9 /assume:byterecl /traceback /real_size:64 /Qzero /Qsave /FoC:\Users\WORK\AppData\Local\Temp\mex_R3lnSZ\DoubPrec.obj /O2 /DNDEBUG -DMX_COMPAT_32 "F:\University\M.S\Proposal\Sources\ACTIVE CONTROL\FAST-SC-Files\NWTCLibrary\Source\DoubPrec.f90"
 
 
--> ifort  /Qprec "/IC:\Program Files\MATLAB\R2011a/extern/include" -c -nologo -DMATLAB_MEX_FILE /MD /fp:source /Qvc9 /assume:byterecl /traceback /real_size:64 /Qzero /Qsave /FoC:\Users\WORK\AppData\Local\Temp\mex_R3lnSZ\SysMatlab.obj /O2 /DNDEBUG -DMX_COMPAT_32 "F:\University\M.S\Proposal\Sources\ACTIVE CONTROL\FAST-SC-Files\NWTCLibrary\Source\SysMatlab.f90"
 
 
--> ifort  /Qprec "/IC:\Program Files\MATLAB\R2011a/extern/include" -c -nologo -DMATLAB_MEX_FILE /MD /fp:source /Qvc9 /assume:byterecl /traceback /real_size:64 /Qzero /Qsave /FoC:\Users\WORK\AppData\Local\Temp\mex_R3lnSZ\NWTC_IO.obj /O2 /DNDEBUG -DMX_COMPAT_32 "F:\University\M.S\Proposal\Sources\ACTIVE CONTROL\FAST-SC-Files\NWTCLibrary\Source\NWTC_IO.f90"
 
 
--> ifort  /Qprec "/IC:\Program Files\MATLAB\R2011a/extern/include" -c -nologo -DMATLAB_MEX_FILE /MD /fp:source /Qvc9 /assume:byterecl /traceback /real_size:64 /Qzero /Qsave /FoC:\Users\WORK\AppData\Local\Temp\mex_R3lnSZ\NWTC_Num.obj /O2 /DNDEBUG -DMX_COMPAT_32 "F:\University\M.S\Proposal\Sources\ACTIVE CONTROL\FAST-SC-Files\NWTCLibrary\Source\NWTC_Num.f90"
 
 
--> ifort  /Qprec "/IC:\Program Files\MATLAB\R2011a/extern/include" -c -nologo -DMATLAB_MEX_FILE /MD /fp:source /Qvc9 /assume:byterecl /traceback /real_size:64 /Qzero /Qsave /FoC:\Users\WORK\AppData\Local\Temp\mex_R3lnSZ\NWTC_Aero.obj /O2 /DNDEBUG -DMX_COMPAT_32 "F:\University\M.S\Proposal\Sources\ACTIVE CONTROL\FAST-SC-Files\NWTCLibrary\Source\NWTC_Aero.f90"
 
 
--> ifort  /Qprec "/IC:\Program Files\MATLAB\R2011a/extern/include" -c -nologo -DMATLAB_MEX_FILE /MD /fp:source /Qvc9 /assume:byterecl /traceback /real_size:64 /Qzero /Qsave /FoC:\Users\WORK\AppData\Local\Temp\mex_R3lnSZ\ModMesh.obj /O2 /DNDEBUG -DMX_COMPAT_32 "F:\University\M.S\Proposal\Sources\ACTIVE CONTROL\FAST-SC-Files\NWTCLibrary\Source\ModMesh.f90"
 
 
--> ifort  /Qprec "/IC:\Program Files\MATLAB\R2011a/extern/include" -c -nologo -DMATLAB_MEX_FILE /MD /fp:source /Qvc9 /assume:byterecl /traceback /real_size:64 /Qzero /Qsave /FoC:\Users\WORK\AppData\Local\Temp\mex_R3lnSZ\NWTC_Library.obj /O2 /DNDEBUG -DMX_COMPAT_32 "F:\University\M.S\Proposal\Sources\ACTIVE CONTROL\FAST-SC-Files\NWTCLibrary\Source\NWTC_Library.f90"
 
 
--> ifort  /Qprec "/IC:\Program Files\MATLAB\R2011a/extern/include" -c -nologo -DMATLAB_MEX_FILE /MD /fp:source /Qvc9 /assume:byterecl /traceback /real_size:64 /Qzero /Qsave /FoC:\Users\WORK\AppData\Local\Temp\mex_R3lnSZ\SharedInflowDefs.obj /O2 /DNDEBUG -DMX_COMPAT_32 F:\University\M.S\Proposal\Sources\Programs\AD_v13.00.02a-bjj\Source\InflowWind\Source\SharedInflowDefs.f90
 
 
--> ifort  /Qprec "/IC:\Program Files\MATLAB\R2011a/extern/include" -c -nologo -DMATLAB_MEX_FILE /MD /fp:source /Qvc9 /assume:byterecl /traceback /real_size:64 /Qzero /Qsave /FoC:\Users\WORK\AppData\Local\Temp\mex_R3lnSZ\HHWind.obj /O2 /DNDEBUG -DMX_COMPAT_32 F:\University\M.S\Proposal\Sources\Programs\AD_v13.00.02a-bjj\Source\InflowWind\Source\HHWind.f90
 
 
--> ifort  /Qprec "/IC:\Program Files\MATLAB\R2011a/extern/include" -c -nologo -DMATLAB_MEX_FILE /MD /fp:source /Qvc9 /assume:byterecl /traceback /real_size:64 /Qzero /Qsave /FoC:\Users\WORK\AppData\Local\Temp\mex_R3lnSZ\FFWind.obj /O2 /DNDEBUG -DMX_COMPAT_32 F:\University\M.S\Proposal\Sources\Programs\AD_v13.00.02a-bjj\Source\InflowWind\Source\FFWind.f90
 
 
--> ifort  /Qprec "/IC:\Program Files\MATLAB\R2011a/extern/include" -c -nologo -DMATLAB_MEX_FILE /MD /fp:source /Qvc9 /assume:byterecl /traceback /real_size:64 /Qzero /Qsave /FoC:\Users\WORK\AppData\Local\Temp\mex_R3lnSZ\HAWCWind.obj /O2 /DNDEBUG -DMX_COMPAT_32 F:\University\M.S\Proposal\Sources\Programs\AD_v13.00.02a-bjj\Source\InflowWind\Source\HAWCWind.f90
 
 
--> ifort  /Qprec "/IC:\Program Files\MATLAB\R2011a/extern/include" -c -nologo -DMATLAB_MEX_FILE /MD /fp:source /Qvc9 /assume:byterecl /traceback /real_size:64 /Qzero /Qsave /FoC:\Users\WORK\AppData\Local\Temp\mex_R3lnSZ\FDWind.obj /O2 /DNDEBUG -DMX_COMPAT_32 F:\University\M.S\Proposal\Sources\Programs\AD_v13.00.02a-bjj\Source\InflowWind\Source\FDWind.f90
 
 
--> ifort  /Qprec "/IC:\Program Files\MATLAB\R2011a/extern/include" -c -nologo -DMATLAB_MEX_FILE /MD /fp:source /Qvc9 /assume:byterecl /traceback /real_size:64 /Qzero /Qsave /FoC:\Users\WORK\AppData\Local\Temp\mex_R3lnSZ\CTWind.obj /O2 /DNDEBUG -DMX_COMPAT_32 F:\University\M.S\Proposal\Sources\Programs\AD_v13.00.02a-bjj\Source\InflowWind\Source\CTWind.f90
 
 
--> ifort  /Qprec "/IC:\Program Files\MATLAB\R2011a/extern/include" -c -nologo -DMATLAB_MEX_FILE /MD /fp:source /Qvc9 /assume:byterecl /traceback /real_size:64 /Qzero /Qsave /FoC:\Users\WORK\AppData\Local\Temp\mex_R3lnSZ\UserWind.obj /O2 /DNDEBUG -DMX_COMPAT_32 F:\University\M.S\Proposal\Sources\Programs\AD_v13.00.02a-bjj\Source\InflowWind\Source\UserWind.f90
 
 
--> ifort  /Qprec "/IC:\Program Files\MATLAB\R2011a/extern/include" -c -nologo -DMATLAB_MEX_FILE /MD /fp:source /Qvc9 /assume:byterecl /traceback /real_size:64 /Qzero /Qsave /FoC:\Users\WORK\AppData\Local\Temp\mex_R3lnSZ\InflowWindMod.obj /O2 /DNDEBUG -DMX_COMPAT_32 F:\University\M.S\Proposal\Sources\Programs\AD_v13.00.02a-bjj\Source\InflowWind\Source\InflowWindMod.f90
 
 
--> ifort  /Qprec "/IC:\Program Files\MATLAB\R2011a/extern/include" -c -nologo -DMATLAB_MEX_FILE /MD /fp:source /Qvc9 /assume:byterecl /traceback /real_size:64 /Qzero /Qsave /FoC:\Users\WORK\AppData\Local\Temp\mex_R3lnSZ\SharedTypes.obj /O2 /DNDEBUG -DMX_COMPAT_32 F:\University\M.S\Proposal\Sources\Programs\AD_v13.00.02a-bjj\Source\SharedTypes.f90
 
F:\University\M.S\Proposal\Sources\Programs\AD_v13.00.02a-bjj\Source\SharedTypes.f90(45): error #6401: The attributes of this name conflict with those made accessible by a USE statement.   [PROGDESC]
   END TYPE ProgDesc
------------^
F:\University\M.S\Proposal\Sources\Programs\AD_v13.00.02a-bjj\Source\SharedTypes.f90(45): error #6148: The name on this END TYPE statement is different from the name on the corresponding derived type statement   [PROGDESC]
   END TYPE ProgDesc
------------^
compilation aborted for F:\University\M.S\Proposal\Sources\Programs\AD_v13.00.02a-bjj\Source\SharedTypes.f90 (code 1)
 
  C:\PROGRA~1\MATLAB\R2011A\BIN\MEX.PL: Error: Compile of 'F:\University\M.S\Proposal\Sources\Programs\AD_v13.00.02a-bjj\Source\SharedTypes.f90' failed.
 
??? Error using ==> mex at 208
Unable to complete successfully.

Error in ==> make_FAST_SFunc at 64


Waiting for your great ANSWERS!

REGARDS
-----
Hamid Hokmabady
M.Sc Student of Civil Engineering
Tabriz University
Tabriz
Iran

Bonnie.Jonkman
Posts: 569
Joined: Thu Nov 10, 2005 10:51 am
Organization: Envision Energy USA
Location: Colorado
Location: Boulder, CO
Contact:

Re: Instructions for Compiling FAST

Postby Bonnie.Jonkman » Wed Jun 04, 2014 1:36 pm

Hamid,

Have you modified the AeroDyn SharedTypes.f90 source file? Lines 42-45 should be commented out in AeroDyn v13.00.02a-bjj (that type is now defined in NWTC Library).
Bonnie Jonkman

Envision Energy USA, 2016-
National Renewable Energy Laboratory, 2003-2016

Hamid.Hokmabady
Posts: 17
Joined: Wed Apr 17, 2013 2:10 am
Organization: University
Location: Iran

Re: Instructions for Compiling FAST

Postby Hamid.Hokmabady » Wed Jun 04, 2014 1:55 pm

Dear Bonnie;
Thanks for your reply;

I haven't modified that! I worked on FAST source file, not AeroDyn's files! It's the original one and I didn't changed anything!
So now do you suggest sth about that? What should I do?

Regards
-----
Hamid Hokmabady
M.Sc Student of Civil Engineering
Tabriz University
Tabriz
Iran

Hamid.Hokmabady
Posts: 17
Joined: Wed Apr 17, 2013 2:10 am
Organization: University
Location: Iran

Re: Instructions for Compiling FAST

Postby Hamid.Hokmabady » Fri Jun 06, 2014 12:13 am

Dear Bonnie;

I did some changes and also I used the way that you told me about SharedTypes.f90 and I used the right file : NWTC_SharedDataTypes.f90
Now everything is all right and compiling DONE successfully!

Thanks for all of your help and HINTS and great keys;
Regards
-----
Hamid Hokmabady
M.Sc Student of Civil Engineering
Tabriz University
Tabriz
Iran

Mohit.Soni
Posts: 3
Joined: Thu Jun 12, 2014 12:12 pm
Organization: University of Texas at Austin
Location: Texas

Re: Instructions for Compiling FAST

Postby Mohit.Soni » Fri Jun 13, 2014 12:34 pm

Hi all,

This forum has been very helpful for me. I got to learn a lot about many details about running FAST and interpreting the results.

I am modeling a 13.2 MW wind turbine on a semi-submersible platform. For that, I am trying to compile DISCON.dll and FAST (version 7). Though the compilation goes fine, the results, after I run the compiled FAST for my model, does not seem appropriate. The steps I follow are:
1. Edit the DISCON.f90 file (provided and edited by JASON) for my wind turbine model control parameters.
2. Compile this to produce DISCON.dll.
3. Compile FAST for BladedDLLInterface using the source files provided in the packages (FAST, AeroDyn, NWTC subroutines, InflowWind).

Am I missing some step?
To give you an idea of the results I get, here is an image of the blade pitch time series that I get. It goes to a constant value at about 770 seconds.
BladePitch.png
BladePitch.png (5.35 KiB) Viewed 3958 times

There might be some problem with the way I am compiling.

Thanks!
Mohit Soni
M.S. Student
Structural Engineering
The University of Texas at Austin

Bonnie.Jonkman
Posts: 569
Joined: Thu Nov 10, 2005 10:51 am
Organization: Envision Energy USA
Location: Colorado
Location: Boulder, CO
Contact:

Re: Instructions for Compiling FAST

Postby Bonnie.Jonkman » Sat Jun 14, 2014 12:02 pm

Hi, Mohit.

I don't think this is a problem with compiling.

It could be a problem in the controller logic or some setting in the model. Perhaps the wind speed changes at 770 seconds?
Bonnie Jonkman

Envision Energy USA, 2016-
National Renewable Energy Laboratory, 2003-2016

Mohit.Soni
Posts: 3
Joined: Thu Jun 12, 2014 12:12 pm
Organization: University of Texas at Austin
Location: Texas

Re: Instructions for Compiling FAST

Postby Mohit.Soni » Tue Jun 17, 2014 10:29 am

Bonnie,
Thanks for your help. I'll look into the controller logic carefully and try to see what's the problem.
Mohit Soni
M.S. Student
Structural Engineering
The University of Texas at Austin

Jan.Haefele
Posts: 21
Joined: Tue Oct 22, 2013 2:53 am
Organization: Institute of Structural Analysis
Location: Germany
Location: Hannover, Germany
Contact:

Re: Instructions for Compiling FAST

Postby Jan.Haefele » Wed Jul 09, 2014 6:13 am

Hello everybody,

I tried to compile the new FAST version v8.08 with standard settings (Win32) and using the supplied Visual Studio project file this works fine. When I try to compile it for x64 systems I get the error that the MAP_x64.lib is missing. However, this seems reasonable, since this file doesn't exist in the MAP directory. So I thought that it's part of the MAP archive, but this doesn't contain suche a file, too. Can anybody tell me where I can find the newest version of the MAP_x64.lib?

Thanks in advance and best regards,

Jan
Jan Häfele
Institute of Structural Analysis
Gottfried Wilhelm Leibniz Universität Hannover
Appelstr. 9a
D-30167 Hannover
Germany

Bonnie.Jonkman
Posts: 569
Joined: Thu Nov 10, 2005 10:51 am
Organization: Envision Energy USA
Location: Colorado
Location: Boulder, CO
Contact:

Re: Instructions for Compiling FAST

Postby Bonnie.Jonkman » Wed Jul 09, 2014 1:33 pm

Hi, Jan.

I've updated the archive on the website to include the missing MAP_x64.lib file: http://wind.nrel.gov/designcodes/simula ... 0c-bjj.exe
You'll have to download the archive again. Sorry about that!
Bonnie Jonkman

Envision Energy USA, 2016-
National Renewable Energy Laboratory, 2003-2016

Jan.Haefele
Posts: 21
Joined: Tue Oct 22, 2013 2:53 am
Organization: Institute of Structural Analysis
Location: Germany
Location: Hannover, Germany
Contact:

Re: Instructions for Compiling FAST

Postby Jan.Haefele » Thu Jul 10, 2014 2:32 am

Hi Bonnie,

I thank you! It works fine with newest version of Intel Fortran Compiler.

Kind regards,

Jan
Jan Häfele
Institute of Structural Analysis
Gottfried Wilhelm Leibniz Universität Hannover
Appelstr. 9a
D-30167 Hannover
Germany

Mahmoud.Jahjouh
Posts: 5
Joined: Thu Jun 26, 2014 6:52 am
Organization: Leibniz Universität Hannover
Location: Hannover - Germanz

Re: Instructions for Compiling FAST

Postby Mahmoud.Jahjouh » Thu Jul 24, 2014 6:53 am

Dear Bonnie,

Thanks for your effort. I'm trying to compile FAST on a OpenSUSE (Linux OS). To make my reply as short as possible, I summarize the following points:
1) I downloaded the Latest version of FAST (( FAST_v8.08.00c-bjj )),
2) Extracted it,
3) Copied the (Makefile) file from \Compiling to \Source,
4) Opened the Linux terminal,
and
5) used the command: (( make ))

Problem#1:
Stops during compiling:

Code: Select all

gfortran: error: ../Source/dependencies/MAP/MAP.so: No such file or directory
make: *** [FAST_glin64] Error 1

Related Information:
MAP.so NOT exist in the Sources/dependencies/MAP, which comes along the FAST archive.
Attempted Solution:
Downloaded the Mooring Analysis Program (MAP) latest version (MAP_v0.87.06a-mdm), found the (MAP.so) file inside it, copied it back to /Source/dependencies/MAP, and tried to launch the command (make) again.

Problem#2:
Running the (make) command, I get:

Code: Select all

 unrecognized option '--stack=999999999'

Related Information:
When opening the url provided in the (makefile) file to revise the available options for gfortran, I didnt find the -Wl,--stack=999999999,--large-address-aware options.
Attempted Solution:
I simply deleted them from the (MakeFile) as it is stated that they are not necessary for 64bit systems, which is my case.


Problem#3:
Running the (make) command, (for the third time - wishing that it would somehow tell me "success" which it didnt), I get:

Code: Select all

/usr/lib64/gcc/x86_64-suse-linux/4.8/../../../../x86_64-suse-linux/bin/ld: cannot find -llapack
/usr/lib64/gcc/x86_64-suse-linux/4.8/../../../../x86_64-suse-linux/bin/ld: cannot find -lblas
collect2: error: ld returned 1 exit status
make: *** [FAST_glin64] Error 1

Related Information:
I think that this piece of code is responsible for the error, but I cannot manage to decypher it.

Code: Select all

ifeq ($(OS),Windows_NT)
   Registry     = $(BIN_DIR)/Registry_win32.exe
   MAP_lib      = $(MAP_DIR)/MAP_win32.lib
   LAPACK_LINK  = -llapack -lblas -LC:/LAPACK/win32
else
   Registry     = registry.exe
   MAP_lib      = $(MAP_DIR)/MAP.so
   LAPACK_LINK  = -llapack -lblas
endif


Now this is where I'm stuck. I dont want to simply delete the (-llapack -lblas) before understanding what they are.

PS: I made sure I set the version to 64 bits inside the Makefile.




Any help would be appreciated.

Regards and Respects,
MJ
MSc Mahmoud M. Jahjouh
Institute of Mechanics and Computational Mechanics (IBNM)
Gottfried Wilhelm Leibniz Universität Hannover
Appelstr. 9a
30167 Hannover
Germany

Bonnie.Jonkman
Posts: 569
Joined: Thu Nov 10, 2005 10:51 am
Organization: Envision Energy USA
Location: Colorado
Location: Boulder, CO
Contact:

Re: Instructions for Compiling FAST

Postby Bonnie.Jonkman » Thu Jul 24, 2014 5:18 pm

Hi, Mahmoud.

We don't yet support FAST v8.08 on Linux, and so I'm not surprised that there have been some issues.

Regarding Problem #1:
The solution of getting MAP.so is okay for compiling. However, if you try to run FAST using the MAP module, it will crash with the 0.87.06a version you found. We haven't yet updated MAP.so to the latest version. (Marco--the developer--no longer works at NREL. We are working with Marco to get a verison of MAP that is easier for us to maintain and distribute, but it may take a little while.) FAST may run okay with it if you run models that don't use mooring lines.

Regarding Problem #2:
If the compiler complains, removing those options like you did is the way to go. Though, I should clarify that the options aren't necessary for 64-bit compilers. If you are using a 32-bit compiler on a 64-bit system, you will probably want to have those options or their equivalent. (It will compile fine without these options with 32-bit compilers, but you may not be able to run some of the largers FAST models such as the OC4 Jacket.)

Regarding Problem #3:
Options -llapck and -lblas tell the compiler to link with libraries liblapack.so and libblas.so. As I understand it, most Linux systems have these LAPACK and BLAS libraries pre-installed, so I'd be surprised if they aren't on your system. You will not be able to successfully create a FAST executable without these libraries. (You can install them yourself if you have to.)
Bonnie Jonkman

Envision Energy USA, 2016-
National Renewable Energy Laboratory, 2003-2016

Mahmoud.Jahjouh
Posts: 5
Joined: Thu Jun 26, 2014 6:52 am
Organization: Leibniz Universität Hannover
Location: Hannover - Germanz

Re: Instructions for Compiling FAST

Postby Mahmoud.Jahjouh » Fri Jul 25, 2014 5:17 am

Dear Bonnie,
I asked my system admins to provide me the LAPACK and BLAS packages, which they did.

Problem #4:

Code: Select all

Obj_lin64/MAP.obj: In function `__map_MOD_map_init':
MAP.f90:(.text+0x22bb): undefined reference to `MAPCALL_SetRootname'
collect2: error: ld returned 1 exit status
make: *** [FAST_glin64] Error 1


Perhaps thats because the (MAP.so) file does not support linux?
Bonnie.Jonkman wrote:We don't yet support FAST v8.08 on Linux, and so I'm not surprised that there have been some issues.


Request:
Is their any FAST v8 program that supports Linux?

Regards,
MJ
MSc Mahmoud M. Jahjouh
Institute of Mechanics and Computational Mechanics (IBNM)
Gottfried Wilhelm Leibniz Universität Hannover
Appelstr. 9a
30167 Hannover
Germany

Eoghan.Pierce
Posts: 1
Joined: Tue Jul 29, 2014 8:31 am
Organization: Student - Dublin Institute of Technology
Location: Ireland

Re: Instructions for Compiling FAST

Postby Eoghan.Pierce » Sat Aug 30, 2014 9:10 pm

Hi,

I am having trouble compiling FAST, my computer skills are limited. I am following the information for compiling FAST v8 for Visual Basic with Fortran from the pre made Fortran file provided. When I build the file, am outputting the correct file to the bin folder as per your instructions but when I try to run, fast aborts.

I am using Visual Basic 2012 (and have access to 2010), and Intel compiler XE Fortran 2013 SP1.
I am receiving these errors:

'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Users\Eoghan\Desktop\FV8\bin\FAST_dev_Debug_Win32.exe'. Symbols loaded.
'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Windows\SysWOW64\ntdll.dll'. Cannot find or open the PDB file.
'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Windows\SysWOW64\kernel32.dll'. Cannot find or open the PDB file.
'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Windows\SysWOW64\KernelBase.dll'. Cannot find or open the PDB file.
'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Users\Eoghan\Desktop\FV8\bin\MAP_win32.dll'. Cannot find or open the PDB file.
'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Windows\SysWOW64\user32.dll'. Cannot find or open the PDB file.
'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Windows\SysWOW64\gdi32.dll'. Cannot find or open the PDB file.
'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Windows\SysWOW64\lpk.dll'. Cannot find or open the PDB file.
'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Windows\SysWOW64\usp10.dll'. Cannot find or open the PDB file.
'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Windows\SysWOW64\msvcrt.dll'. Cannot find or open the PDB file.
'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Windows\SysWOW64\advapi32.dll'. Cannot find or open the PDB file.
'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Windows\SysWOW64\sechost.dll'. Cannot find or open the PDB file.
'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Windows\SysWOW64\rpcrt4.dll'. Cannot find or open the PDB file.
'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Windows\SysWOW64\sspicli.dll'. Cannot find or open the PDB file.
'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Windows\SysWOW64\cryptbase.dll'. Cannot find or open the PDB file.
'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Windows\SysWOW64\msvcp100.dll'. Cannot find or open the PDB file.
'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Windows\SysWOW64\msvcr100.dll'. Cannot find or open the PDB file.
'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Windows\SysWOW64\imagehlp.dll'. Cannot find or open the PDB file.
'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Windows\SysWOW64\imm32.dll'. Cannot find or open the PDB file.
'FAST_dev_Debug_Win32.exe' (Win32): Loaded 'C:\Windows\SysWOW64\msctf.dll'. Cannot find or open the PDB file.


Additionally, I am wondering if there is a way to extend the run time of the cert test past 60s. When I try it fails at 72s.

Any help is appreciated.

I do also note that another user has had similar issues but I was unable to rectify the problem with the solutions provided to him.

Kind regards

Eoghan.


Return to “Computer-Aided Engineering Software Tools”

Who is online

Users browsing this forum: No registered users and 1 guest