The mbc3.m script that comes with the MBC3 toolset can only be used if you have a system with some states in the rotating frame. If you want to analyze a system with all states in the fixed frame, you can use the cce.m script supplied with the MBC3 toolset. The cce.m script performs the eigenanalysis directly on the azimuth-averaged state matrix, AvgAMat (regardless of whether or not the system has states in the rotating frame). This is perfectly suitable for a system with only states in the fixed frame. (For a system with some states in the rotating frame, the cce.m script employs the constant-coefficient-approximation eigenanalysis.)
I hope that helps.
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901