NREL Forum

Topic	Replies	Views	Activity
Welcome to Discourse-Based Wind & Water Forum News and Announcements Welcome to the NREL’s Discourse-Based Wind & Water Forum! This forum is used to support the software and data provided by NREL’s wind and water programs. This forum replaces the old php-based NWTC forum previously host…	9	4867	February 2, 2022
Requesting access to our forum Forum Access Requests (READ THIS FIRST) Note: these rules apply only to accounts on this forum. They do not apply to accounts on other websites. Before creating a user account, please note our community rules: Community Rules. There are two steps to creating…	4	3123	February 2, 2022
To check the response of wind turbine using TMDI or TMIS( tuned mass damper inerter or tuned mass inertial system under wind and seismic load Computer-Aided Engineering Software Tools	13	1045	May 14, 2024
IEC:61400 -1 2019 for turbulence intensity in TurbSim Computer-Aided Engineering Software Tools	9	1995	May 13, 2024
Campbell diagram for 5MW turbine rotor Structural Analysis	48	37906	May 13, 2024
Input Parameters of Tower for Bmodes and Elastodyn (IEA 15 MW) Structural Analysis	18	1127	May 10, 2024
IEA 15MW Steady state Computer-Aided Engineering Software Tools	17	551	May 10, 2024
Linearization - create mode shapes Structural Analysis	4	102	May 10, 2024
rtTSR (Tip Speed Ratio) output isn't matching with TSR calculated from rtSpeed for Scaled G06 Turbine (0.6 m Diameter) Rotor Aerodynamics	5	133	May 9, 2024
Mass and inertias for 20 mw wind turbine Structural Analysis	5	95	May 8, 2024
PMSG for a 20 MW Wind turbine Computer-Aided Engineering Software Tools	8	135	May 6, 2024
Convergence Issues with TurbSim in User-Defined Time Series Inflow Turbulence	4	102	May 6, 2024
How I can get mooring line tension! Computer-Aided Engineering Software Tools	11	263	May 4, 2024
Would like to know the calculation formula of mooring system considering Wave Kinematics and Currents Computer-Aided Engineering Software Tools	2	108	May 4, 2024
Modelling an 18MW turbine with OpenFAST Structural Analysis	8	348	May 3, 2024
Substructure material Computer-Aided Engineering Software Tools	3	86	May 3, 2024
PTDM implementation Structural Analysis	50	1231	May 3, 2024
15 MW RWT SolidWorks Blade Computer-Aided Engineering Software Tools	2	91	May 2, 2024
Campbell Diagram & MBC3 output relation Computer-Aided Engineering Software Tools	30	14336	May 2, 2024
FOWT simulation with Fl_Mode = 1 in ROSCO Structural Analysis	3	495	May 1, 2024
Bmodes for tower (with rna_on and rna_off) Computer-Aided Engineering Software Tools	24	199	May 1, 2024
Imposed Motion in Surge to FOWT with Semisubersible Floater Wind & Water	22	301	April 30, 2024
Tower-Top Acceleration from Partial Velocities Computer-Aided Engineering Software Tools	1	76	April 30, 2024
Layout optimization in FLORIS Wind Farm Modeling	2	121	April 30, 2024
Deriving lift/drag coefficients Airfoils	16	599	April 30, 2024
ROSCO as a controller for a new BEM implementation Controls	1	94	April 29, 2024
NuMAD shell7.src Ansys Structural Analysis	1	73	April 29, 2024
IEA-10.0-198-RWT and IEA-15-240-RWT-UMaineSemi Computer-Aided Engineering Software Tools	1	97	April 29, 2024
Extreme events Computer-Aided Engineering Software Tools	58	26986	April 29, 2024
Nacelle and hub inlusion in SOWFA simulations with OpenFAST Rotor Aerodynamics	0	86	April 27, 2024

Welcome to Discourse-Based Wind & Water Forum

Welcome to the NREL’s Discourse-Based Wind & Water Forum! This forum is used to support the software and data provided by NREL’s wind and water programs. This forum replaces the old php-based NWTC forum previously host…

9

4867

February 2, 2022

Requesting access to our forum

Forum Access Requests (READ THIS FIRST)

Note: these rules apply only to accounts on this forum. They do not apply to accounts on other websites. Before creating a user account, please note our community rules: Community Rules. There are two steps to creating…