Use of UserProp

Provide feedback, request enhancements, and get help with wind-turbine computer-aided engineering tools.

Moderators: Bonnie.Jonkman, Jason.Jonkman

Simon.Wiedemann
Posts: 75
Joined: Mon Jan 09, 2017 1:00 am
Organization: TÜV NORD
Location: Germany

Use of UserProp

Postby Simon.Wiedemann » Tue Mar 30, 2021 1:43 am

Dear all,

with OpenFAST 2.3 a UserProp value was introduced for each airfoil table (before it was Ctrl i believe) together with AFTabMod. The intention was to enable control flaps deployed dynamically in the simulation controlled by the dll-controller.
https://openfast.readthedocs.io/en/main/source/user/api_change.html#openfast-v2-2-0-to-openfast-v2-3-0

Is it planned to enable the use of this UserProp value as static input given for each airfoil file or each aerodynamic station?
Idea is to use the thickness of the blade as an indicator which airfoil table to use or interpolate. As long as the characteristics of the airfoils are similar in one airfoil file linear interpolation between tables should yield sufficient results while decreasing preprocessing steps.

Best regards,
Simon

Jason.Jonkman
Posts: 5762
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:

Re: Use of UserProp

Postby Jason.Jonkman » Tue Mar 30, 2021 6:35 am

Dear Simon,

The addition of UserProp in AeroDyn and the controls interfaces is to allow the user to interpolate between different airfoil data through the controller, e.g., to simulate trailing edge flaps or other airfoil flow-control technologies.

NREL has not been funded to implement interpolation of airfoil data based on thickness; it is generally recommend that the user use AirfoilPrep or AirfoilPreppy to preprocess the airfoil data before use in FAST / OpenFAST.

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov


Return to “Computer-Aided Engineering Software Tools”

Who is online

Users browsing this forum: No registered users and 1 guest