Problem to download Preprocessors SS_Fitting

Provide feedback, request enhancements, and get help with wind-turbine computer-aided engineering tools.

Moderators: Bonnie.Jonkman, Jason.Jonkman

salic.tom
Posts: 6
Joined: Fri Jan 24, 2020 12:57 am
Organization: Irenav
Location: France

Problem to download Preprocessors SS_Fitting

Postby salic.tom » Thu Feb 04, 2021 7:29 am

Good morning,

I work on the control and command of floating wind turbines. I have been using your tools for two years (which I also find very well designed). however I can no longer download tools like SS-fitting or SOWFA from your new web site. I only access the software documentation. Anyway, could you tell me how to download these tools.

Thanks in advance,

Best regards,

Tom SALIC

Jason.Jonkman
Posts: 5778
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:

Re: Problem to download Preprocessors SS_Fitting

Postby Jason.Jonkman » Thu Feb 04, 2021 9:35 am

Dear Tom,

Yes, the replacement for the old NWTC Information Portal is still a work in progress. I know they are working to add links to download the software, but this is taking a while. In the meantime, I've placed many of the software archives on my Google drive.

SS_Fitting is available here: https://drive.google.com/drive/folders/ ... sp=sharing.

I would access SOWFA through github: https://github.com/NREL/SOWFA.

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

salic.tom
Posts: 6
Joined: Fri Jan 24, 2020 12:57 am
Organization: Irenav
Location: France

Re: Problem to download Preprocessors SS_Fitting

Postby salic.tom » Fri Feb 05, 2021 12:31 am

Dear Dr Jonkman,

Thank you for your prompt response,

Best regards,


Return to “Computer-Aided Engineering Software Tools”

Who is online

Users browsing this forum: No registered users and 1 guest