ٰVestas 660 kw Wind Turbine input file

This forum if for discussing controls. Questions about how to implement controls in FAST are more appropriate to the CAE Tools forum.

Moderator: Bonnie.Jonkman

Vahid.Fazlollahi
Posts: 25
Joined: Mon Nov 20, 2017 1:47 am
Organization: Shahid Beheshti University
Location: Iran, Tehran

ٰVestas 660 kw Wind Turbine input file

Postby Vahid.Fazlollahi » Sun Feb 25, 2018 11:45 am

Hi,
I need Vestas 660 Kw optislip input file to use in Fast.
Please, can any one send me this kind of Wind Turbine input file.
Thanks a lot,

Jason.Jonkman
Posts: 4952
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:

Re: ٰVestas 660 kw Wind Turbine input file

Postby Jason.Jonkman » Mon Feb 26, 2018 6:21 am

Dear Vahid,

I doubt anyone can share a FAST model with you that contains a wind turbine manufacturer's proprietary information.

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

Vahid.Fazlollahi
Posts: 25
Joined: Mon Nov 20, 2017 1:47 am
Organization: Shahid Beheshti University
Location: Iran, Tehran

Re: ٰVestas 660 kw Wind Turbine input file

Postby Vahid.Fazlollahi » Mon Feb 26, 2018 8:11 am

Dear Jason,
I did the modeling of this type of turbine, but it is not complete. So i need a complete model of this type of turbine.
How can I get complete model of that. Because i need it to use in Fast to validate my modeling. Because of that my project is half finished.
Best regards,

Jason.Jonkman
Posts: 4952
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:

Re: ٰVestas 660 kw Wind Turbine input file

Postby Jason.Jonkman » Mon Feb 26, 2018 8:15 am

Dear Vahid,

What data are you missing to complete the model?

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

Vahid.Fazlollahi
Posts: 25
Joined: Mon Nov 20, 2017 1:47 am
Organization: Shahid Beheshti University
Location: Iran, Tehran

Re: ٰVestas 660 kw Wind Turbine input file

Postby Vahid.Fazlollahi » Mon Feb 26, 2018 8:26 am

Dear Jason,
I need Turbine control, Turbine configuration, Mass and Inertia, Drivetrain, Generator, Nacellle and yaw parameters.

Best regards,

Jason.Jonkman
Posts: 4952
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:

Re: ٰVestas 660 kw Wind Turbine input file

Postby Jason.Jonkman » Mon Feb 26, 2018 9:21 am

Dear Vahid,

Again, I suspect it will be hard to obtain this data for a proprietary wind turbine, unless you have a direct collaboration with Vestas that would make this data available to you.

Your best option may be to use one of the publicly available FAST models (e.g. the WindPACT 1.5-MW turbine) and tune and/or scale the properties from this public model to those properties that are publicly available from your specific wind turbine of interest.

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

Vahid.Fazlollahi
Posts: 25
Joined: Mon Nov 20, 2017 1:47 am
Organization: Shahid Beheshti University
Location: Iran, Tehran

Re: ٰVestas 660 kw Wind Turbine input file

Postby Vahid.Fazlollahi » Mon Feb 26, 2018 12:21 pm

Dear Jason,
Thanks a lot for your help.
I will do that.
Best regards.

Vahid.Fazlollahi
Posts: 25
Joined: Mon Nov 20, 2017 1:47 am
Organization: Shahid Beheshti University
Location: Iran, Tehran

Re: ٰVestas 660 kw Wind Turbine input file

Postby Vahid.Fazlollahi » Mon Feb 26, 2018 11:16 pm

Dear Jason,
I need Fast.Farm in my project.
When this software released?
Best Regards,

Jason.Jonkman
Posts: 4952
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:

Re: ٰVestas 660 kw Wind Turbine input file

Postby Jason.Jonkman » Tue Feb 27, 2018 6:34 am

Dear Vahid,

We have now completed the calibration of FAST.Farm against SOWFA (with a paper presented at AIAA SciTech 2018: https://www.nrel.gov/docs/fy18osti/70533.pdf). We are currently working on the validation of FAST.Farm against SOWFA and an associated TORQUE 2018 paper. Our current plant is to publicly release FAST.Farm once this validation is complete…likely later this Spring.

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

Vahid.Fazlollahi
Posts: 25
Joined: Mon Nov 20, 2017 1:47 am
Organization: Shahid Beheshti University
Location: Iran, Tehran

Re: ٰVestas 660 kw Wind Turbine input file

Postby Vahid.Fazlollahi » Wed Feb 28, 2018 12:14 am

Dear Jason,
Thanks a lot for your quick reply and your attention.
I need so much this software in my PhD thesis.

Best Regards,


Return to “Controls”

Who is online

Users browsing this forum: No registered users and 1 guest