Hello,
For implementing Yaw control in Simulink I need Yaw error and HorWndDir, but it seems that they have been removed from the FAST8.Woud you please guide me how I can get Yaw error from Outlist of FAST8 ?
Regard,
Sepideh Kianbkaht
Yaw error ,HorWndDir in FAST 8
Moderator: Bonnie.Jonkman
-
- Posts: 7
- Joined: Mon Apr 17, 2017 9:12 am
- Organization: Colorado School of Mines
- Location: US - Colorado
Yaw error ,HorWndDir in FAST 8
Last edited by Sepideh.kianbakht on Thu Jan 11, 2018 1:25 pm, edited 1 time in total.
-
- Posts: 5428
- Joined: Thu Nov 03, 2005 4:38 pm
- Location: Boulder, CO
- Contact:
Re: Yaw error ,HorWndDir in FAST 8
Dear Sepideh,
While these two outputs have been eliminated from FAST v8, it is not difficult to calculate them from the available outputs. For example, the horizontal wind direction can be derived from the X and Y components of the wind vector outputs available from the InflowWind module and the nacelle-yaw angle may be output from the ElastoDyn module.
Best regards,
While these two outputs have been eliminated from FAST v8, it is not difficult to calculate them from the available outputs. For example, the horizontal wind direction can be derived from the X and Y components of the wind vector outputs available from the InflowWind module and the nacelle-yaw angle may be output from the ElastoDyn module.
Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Senior Engineer | National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
-
- Posts: 7
- Joined: Mon Apr 17, 2017 9:12 am
- Organization: Colorado School of Mines
- Location: US - Colorado
Re: Yaw error ,HorWndDir in FAST 8
Thank you.
Who is online
Users browsing this forum: No registered users and 1 guest