Structural design of the wind turbine blade

Discuss theory and modeling of wind-turbine structures.

Moderator: Bonnie.Jonkman

Jason.Jonkman
Posts: 5738
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:

Re: Structural design of the wind turbine blade

Postby Jason.Jonkman » Tue Apr 23, 2019 6:39 am

Dear Liang and Zhikang,

I'm not sure if others from Sandia have responded, but Brian Resor is no longer employed in the Wind Program at Sandia.

Brian Resor's report describing the reverse-engineered composite layup of the NREL 5-MW baseline blade is available here: https://prod-ng.sandia.gov/techlib-noau ... 132569.pdf.

Have you requested the associated model files through the NuMAD page that Brian referenced above?

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

Zhikang.Deng
Posts: 3
Joined: Fri Apr 12, 2019 8:41 am
Organization: Delft University of Technology
Location: Netherlands

Re: Structural design of the wind turbine blade

Postby Zhikang.Deng » Wed Apr 24, 2019 1:10 am

Dear Jason,

I have contacted them through the email address on the website, and waiting for their reply.


thanks so much for your kind reply


best regards

zhikang

Zhikang.Deng
Posts: 3
Joined: Fri Apr 12, 2019 8:41 am
Organization: Delft University of Technology
Location: Netherlands

Re: Structural design of the wind turbine blade

Postby Zhikang.Deng » Mon Apr 29, 2019 12:05 pm

Dear Jason Jonkman,

Thanks for your kindly reply.

I tried to request the model file days ago through the NuMAD page that Brian referenced , but no one replied me yet.

Thanks.

Best regards.

zhikang

Jason.Jonkman wrote:Dear Liang and Zhikang,

I'm not sure if others from Sandia have responded, but Brian Resor is no longer employed in the Wind Program at Sandia.

Brian Resor's report describing the reverse-engineered composite layup of the NREL 5-MW baseline blade is available here: https://prod-ng.sandia.gov/techlib-noau ... 132569.pdf.

Have you requested the associated model files through the NuMAD page that Brian referenced above?

Best regards,

Jason.Jonkman
Posts: 5738
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:

Re: Structural design of the wind turbine blade

Postby Jason.Jonkman » Mon Apr 29, 2019 5:08 pm

Dear Zhikang,

Sorry, but I'm not sure how to help. Hopefully they'll respond soon.

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

Long.Gao
Posts: 4
Joined: Thu Sep 10, 2020 12:20 am
Organization: harbin engineering university
Location: harbin

Re: Structural design of the wind turbine blade

Postby Long.Gao » Wed Sep 30, 2020 1:53 am

hello Zhikang,
Do you have got the 61.5m blade mode? would you like to share it with me .I tried to request the model file days ago through the NuMAD page that Brian referenced , but no one replied me yet.
thanks in advance
Best regards
Long.Gao


Return to “Structural Analysis”

Who is online

Users browsing this forum: No registered users and 1 guest