Results for OC4 Phase I (jacket), Load Case 2.1

Discuss theory and modeling of wind-turbine structures.

Moderator: Bonnie.Jonkman

Aengus.Connolly
Posts: 6
Joined: Tue Aug 11, 2020 8:38 am
Organization: Wood
Location: Ireland

Results for OC4 Phase I (jacket), Load Case 2.1

Postby Aengus.Connolly » Sat Aug 22, 2020 9:51 am

Dear all,

I am looking for the published results for OC4 Phase 1 (jacket), LC2.1 (static simulation including gravity and buoyancy forces only). It seems that this particular set of results is missing from the Task 30 Research Results site (https://community.ieawind.org/task30/ourlibrary). Results from the other load cases are available for download.

Could anyone suggest an alternative download location?

Kind regards,
Aengus.

Jason.Jonkman
Posts: 5738
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:

Re: Results for OC4 Phase I (jacket), Load Case 2.1

Postby Jason.Jonkman » Mon Aug 24, 2020 7:11 am

Dear Aengus,

The OC4 Phase I (jacket) results are available in the following Google Drive: https://drive.google.com/drive/folders/ ... sp=sharing.

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

Aengus.Connolly
Posts: 6
Joined: Tue Aug 11, 2020 8:38 am
Organization: Wood
Location: Ireland

Re: Results for OC4 Phase I (jacket), Load Case 2.1

Postby Aengus.Connolly » Mon Aug 24, 2020 7:44 am

Hi Jason,

Thanks for sending on the link to the Google drive - this is helpful - and it looks like some of the results files may be more up-to-date than the IEA Task 30 site which I was looking at.

The folder for LC2.1 on the Google drive looks blank also! I was just looking for the source data for the graph presented in Fig.6(b) (vertical force at mudline for static solution) in the OC4 Phase 1 Summary paper. But not to worry if the data is simply unavailable...

Kind regards,
Aengus.

Amy.Robertson
Posts: 3
Joined: Mon Oct 25, 2010 4:11 pm
Organization: NREL
Location: Boulder, CO

Re: Results for OC4 Phase I (jacket), Load Case 2.1

Postby Amy.Robertson » Thu Aug 27, 2020 10:13 am

Sorry for this missing information. NREL did not lead this phase of the OC4 project, and I have not been able to find this dataset either. The person who ran this phase was Wojciech Popko from Fraunhofer. I will follow-up with you offline to try to get you connected.


Return to “Structural Analysis”

Who is online

Users browsing this forum: No registered users and 1 guest