Deflection of ElastoDyn
Moderator: Bonnie.Jonkman

 Posts: 30
 Joined: Mon Dec 02, 2019 1:01 am
 Organization: HAW Hamburg
 Location: Germany
Deflection of ElastoDyn
Dear NRELTeam,
for the 5MW baseline wind turbine I have carried out investigation of extreme loads.
I used the openFAST (Unversioned from 6d9e2b9f48f619e9a74ee6e501d24d4ef47ec21f). As structure model I used ElastoDyn. The extreme values were determined with MExtrem.
The maximum force in xdirection is DLC 1.3 V_ref=25 m/s and in ydirection is DLC 6.1 (idling turbine).
The Simulation Parameter:
DlC 1.3
V_ref=25 m/s (ETM)
WakeMod 2
AFAeroMod2
TowerPotent 1
PC Mode 5
AzimB1Up 0
In general, this model wasn´t changed from the test files in the regression test.
Azimuth position blade 1 = 208.3°
DLC 1.6
WakeMod 0
AFAeroMod 1
PC Mode 0
AzimB1Up 0
Azimuth position blade 1 = 326°
These forces are used for a FEmodel of the blade. They are applied via rigid bodies at the pitch axis at the same position in as in openFAST. I wanted to validate the layup of the model by comparing the displacement of the FEmodel with the deflection of openFAST. The shown in the figure displacement is taken from the pitch axis.
There are deviations of the deflection I cannot explain ou can see that the displacement calculated by FEM makes sense, but in the openFAST simulation the deflection on yaxis I don´t understand. Do you have any suggestion why there is a change of sign? Am I doing it wrong in my simulation?
My second question is, in which direction the local blade coordinate system is. In my understanding the yaxis of every node is parallel to the chord of the root and not of the chord at the node position? The zaxis is along the pitch axis.
Regards
Moritz
for the 5MW baseline wind turbine I have carried out investigation of extreme loads.
I used the openFAST (Unversioned from 6d9e2b9f48f619e9a74ee6e501d24d4ef47ec21f). As structure model I used ElastoDyn. The extreme values were determined with MExtrem.
The maximum force in xdirection is DLC 1.3 V_ref=25 m/s and in ydirection is DLC 6.1 (idling turbine).
The Simulation Parameter:
DlC 1.3
V_ref=25 m/s (ETM)
WakeMod 2
AFAeroMod2
TowerPotent 1
PC Mode 5
AzimB1Up 0
In general, this model wasn´t changed from the test files in the regression test.
Azimuth position blade 1 = 208.3°
DLC 1.6
WakeMod 0
AFAeroMod 1
PC Mode 0
AzimB1Up 0
Azimuth position blade 1 = 326°
These forces are used for a FEmodel of the blade. They are applied via rigid bodies at the pitch axis at the same position in as in openFAST. I wanted to validate the layup of the model by comparing the displacement of the FEmodel with the deflection of openFAST. The shown in the figure displacement is taken from the pitch axis.
There are deviations of the deflection I cannot explain ou can see that the displacement calculated by FEM makes sense, but in the openFAST simulation the deflection on yaxis I don´t understand. Do you have any suggestion why there is a change of sign? Am I doing it wrong in my simulation?
My second question is, in which direction the local blade coordinate system is. In my understanding the yaxis of every node is parallel to the chord of the root and not of the chord at the node position? The zaxis is along the pitch axis.
Regards
Moritz
 Attachments

 Deflection.PNG (82.48 KiB) Viewed 2853 times

 Posts: 5869
 Joined: Thu Nov 03, 2005 4:38 pm
 Location: Boulder, CO
 Contact:
Re: Deflection of ElastoDyn
Dear Moritz,
Regarding your second question, the local blade coordinate system in ElastoDyn (Lb1, Lb, LB3 for blades 1, 2, and 3, respectively) accounts for the local structural pretwist and the local deflection of the blade.
A few clarifying questions, which may point to the answer regarding your first question:
Regarding your second question, the local blade coordinate system in ElastoDyn (Lb1, Lb, LB3 for blades 1, 2, and 3, respectively) accounts for the local structural pretwist and the local deflection of the blade.
A few clarifying questions, which may point to the answer regarding your first question:
 Can I assume the "Node Position" in your tables is a fraction of the blade radius from 0 at the root to 1 at the tip, and so, the units are should say "()" instead of "(N)"?
 The local shear forces and bending moments that you are outputting are the local reaction loads at each node along the blade. So, the loads are found by integrating the applied and inertial loads from each node to the tip, and so, accumulate along the blade. How are you applying these loads to your FE model? Perhaps you are apply something like SpnFlxb1(9) at z = 0.97, SpnFlxb1(8)  SpnFlxb1(9) at z = 0.87, etc.? This would, of course, be a rough approximation because you are not taking the local coordinate systems into account.
 How are you accounting for the the structural pretwist of the blade in your FE model?
Jason Jonkman, Ph.D.
Senior Engineer  National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway  Golden, CO 80401
+1 (303) 384 – 7026  Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Senior Engineer  National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway  Golden, CO 80401
+1 (303) 384 – 7026  Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

 Posts: 30
 Joined: Mon Dec 02, 2019 1:01 am
 Organization: HAW Hamburg
 Location: Germany
Re: Deflection of ElastoDyn
Dear Jason,
thank you for your answer.
You are right the Node position is a fraction of the blade radius. The unit is a typo.
You are also right, how I applied the loads at the FEmodel. According to your answer I should use at least a rotation matrix to take the pre twist into account.
For the FE model I'm accounting the pre twist withe CAD model I'm using. It is designed according to the blade data and with reference to the sandia blade layup.
Best regards
Moritz
thank you for your answer.
You are right the Node position is a fraction of the blade radius. The unit is a typo.
You are also right, how I applied the loads at the FEmodel. According to your answer I should use at least a rotation matrix to take the pre twist into account.
For the FE model I'm accounting the pre twist withe CAD model I'm using. It is designed according to the blade data and with reference to the sandia blade layup.
Best regards
Moritz

 Posts: 5869
 Joined: Thu Nov 03, 2005 4:38 pm
 Location: Boulder, CO
 Contact:
Re: Deflection of ElastoDyn
Dear Moritz,
OK, hopefully the deflection plots make a bit more sense when you update how you calculate the local applied loads.
Best regards,
OK, hopefully the deflection plots make a bit more sense when you update how you calculate the local applied loads.
Best regards,
Jason Jonkman, Ph.D.
Senior Engineer  National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway  Golden, CO 80401
+1 (303) 384 – 7026  Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Senior Engineer  National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway  Golden, CO 80401
+1 (303) 384 – 7026  Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

 Posts: 30
 Joined: Mon Dec 02, 2019 1:01 am
 Organization: HAW Hamburg
 Location: Germany
Re: Deflection of ElastoDyn
Dear Jason,
I have transformed the loads with the pretwist and the angle of deflection (SpnRDxbi and SpanRDyb1).
The deflection looks better now. There is still a deviation. However, it could also be due to the fact that the structural properties of the rotor blade are not ideally represented and I have do adjust them.
best regards
Moritz
I have transformed the loads with the pretwist and the angle of deflection (SpnRDxbi and SpanRDyb1).
The deflection looks better now. There is still a deviation. However, it could also be due to the fact that the structural properties of the rotor blade are not ideally represented and I have do adjust them.
best regards
Moritz

 Posts: 5869
 Joined: Thu Nov 03, 2005 4:38 pm
 Location: Boulder, CO
 Contact:
Re: Deflection of ElastoDyn
Hi Moritz,
I'm glad that your results are making a bit more sense to you now.
A few comments on your equations:
Best regards,
I'm glad that your results are making a bit more sense to you now.
A few comments on your equations:
 This just appears to be a typo, but R_x() needs to use SpnRDxb1, not SpnRDyb1.
 I believe the signs on the SIN() terms are opposite for R_x() and R_y(), considering that you are using the transformation to go from local to global (blade). The signs of the SIN() terms in R_z() look correct because +twist is defined about z.
 While the product of R_z()*R_x()*R_y() would be correct for a zxy rotation sequence from global (blade) to local, in reality, the ElastoDyn module uses a small angle transformation for the blade deflections. So, instead of R_x()*R_y(), ElastoDyn would use the inverse / transpose of the matrix in Equation (22) of the following NREL report: https://www.nrel.gov/docs/fy08osti/41958.pdf (where theta_x = SpnRDxb1 and theta_y = SpnRDyb1 in radians and the transpose is needed because the equation as stated goes from global (blade) to local, and you want to go from local to global (blade).
Best regards,
Jason Jonkman, Ph.D.
Senior Engineer  National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway  Golden, CO 80401
+1 (303) 384 – 7026  Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Senior Engineer  National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway  Golden, CO 80401
+1 (303) 384 – 7026  Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

 Posts: 61
 Joined: Sat Feb 29, 2020 9:56 am
 Organization: NITcalicut
 Location: INDIA
Re: Deflection of ElastoDyn
Sir,
1. Is it Possible to consider buckling effect on NREL 5MW Onshore/Offshore wind turbine in OpenFAST?
2. Can we add Flexibility to the foundation of Offshore wind turbine? I tried unlocking the DOF's at base in NRELOffshrBsline5MW_OC3Monopile_SubDyn and ran the simulation. But I didn't observe any difference in output results with those of a Fixed base. Both have yielded the same results. So Is there any accurate method for adding flexibility to the foundation?
Thank you.
1. Is it Possible to consider buckling effect on NREL 5MW Onshore/Offshore wind turbine in OpenFAST?
2. Can we add Flexibility to the foundation of Offshore wind turbine? I tried unlocking the DOF's at base in NRELOffshrBsline5MW_OC3Monopile_SubDyn and ran the simulation. But I didn't observe any difference in output results with those of a Fixed base. Both have yielded the same results. So Is there any accurate method for adding flexibility to the foundation?
Thank you.

 Posts: 5869
 Joined: Thu Nov 03, 2005 4:38 pm
 Location: Boulder, CO
 Contact:
Re: Deflection of ElastoDyn
Dear Dhaneesh,
Buckling is not directly considered within OpenFAST. Of course, you can postprocess the loads output from OpenFAST to calculate the onset of buckling.
As has been discussed several times on this forum (e.g.: viewtopic.php?f=3&t=1227), foundation flexibility and soilstructural interaction are not available in the master branch of OpenFAST. That said, NREL has been working on this recently, by both including a 6x6 stiffness matrix (coupled springs model) at joints in SubDyn and by introducing a new module, SoilDyn. SoilDyn provides an option for a simple 6x6 stiffness matrix, but also includes options for interfacing to the REDWIN DLLs developed by NGI (to model soilstructure interaction via a superelement, including soil hysteresis), as well as and a placeholder for future implementation of a py and tz curves. These are not currently included in a public release, but are being developed in branches on forks of OpenFAST.
Best regards,
Buckling is not directly considered within OpenFAST. Of course, you can postprocess the loads output from OpenFAST to calculate the onset of buckling.
As has been discussed several times on this forum (e.g.: viewtopic.php?f=3&t=1227), foundation flexibility and soilstructural interaction are not available in the master branch of OpenFAST. That said, NREL has been working on this recently, by both including a 6x6 stiffness matrix (coupled springs model) at joints in SubDyn and by introducing a new module, SoilDyn. SoilDyn provides an option for a simple 6x6 stiffness matrix, but also includes options for interfacing to the REDWIN DLLs developed by NGI (to model soilstructure interaction via a superelement, including soil hysteresis), as well as and a placeholder for future implementation of a py and tz curves. These are not currently included in a public release, but are being developed in branches on forks of OpenFAST.
Best regards,
Jason Jonkman, Ph.D.
Senior Engineer  National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway  Golden, CO 80401
+1 (303) 384 – 7026  Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Senior Engineer  National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway  Golden, CO 80401
+1 (303) 384 – 7026  Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

 Posts: 61
 Joined: Sat Feb 29, 2020 9:56 am
 Organization: NITcalicut
 Location: INDIA
Re: Deflection of ElastoDyn
Sir,
1.Thank you for your information regarding foundation stiffness.
2. Are there any Matlab scripts like MBC to postprocess the output from OpenFAST to get a response by considering the buckling effect on the turbine?
Thank you.
1.Thank you for your information regarding foundation stiffness.
2. Are there any Matlab scripts like MBC to postprocess the output from OpenFAST to get a response by considering the buckling effect on the turbine?
Thank you.

 Posts: 5869
 Joined: Thu Nov 03, 2005 4:38 pm
 Location: Boulder, CO
 Contact:
Re: Deflection of ElastoDyn
Dear Dhaneesh,
I'm not aware of any NRELdeveloped postprocessors that include a buckling check, although perhaps this is included in NREL's WISDEM Systems Engineering tool (https://github.com/WISDEM), of whose details I am not very familiar with.
Best regards,
I'm not aware of any NRELdeveloped postprocessors that include a buckling check, although perhaps this is included in NREL's WISDEM Systems Engineering tool (https://github.com/WISDEM), of whose details I am not very familiar with.
Best regards,
Jason Jonkman, Ph.D.
Senior Engineer  National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway  Golden, CO 80401
+1 (303) 384 – 7026  Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Senior Engineer  National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway  Golden, CO 80401
+1 (303) 384 – 7026  Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

 Posts: 61
 Joined: Sat Feb 29, 2020 9:56 am
 Organization: NITcalicut
 Location: INDIA
Re: Deflection of ElastoDyn
Sir,
1.NREL 5MW reference turbine used in FAST/OpenFAST code is a linear model that considers the combination of modal and multibody dynamics with limited DOF's. So the output generated by FAST is coupled linear response due to windwave loads? Are any nonlinearities considered in the NREL 5MW model?
2. In FAST/OpenFAST Can we consider different directionality of wave and wind?
1.NREL 5MW reference turbine used in FAST/OpenFAST code is a linear model that considers the combination of modal and multibody dynamics with limited DOF's. So the output generated by FAST is coupled linear response due to windwave loads? Are any nonlinearities considered in the NREL 5MW model?
2. In FAST/OpenFAST Can we consider different directionality of wave and wind?

 Posts: 5869
 Joined: Thu Nov 03, 2005 4:38 pm
 Location: Boulder, CO
 Contact:
Re: Deflection of ElastoDyn
Dear Dhaneesh,
Actually, FAST/OpenFAST contain many nonlinear terms. For information on the FAST theory basis, please see the following forum topic: viewtopic.php?f=4&t=424.
Yes, FAST/OpenFAST can consider different directionality of wind and waves. InflowWind input parameter PropagationDir sets the mean wind direction and HydroDyn input parameter WaveDir sets the mean wave direction.
Best regards,
Actually, FAST/OpenFAST contain many nonlinear terms. For information on the FAST theory basis, please see the following forum topic: viewtopic.php?f=4&t=424.
Yes, FAST/OpenFAST can consider different directionality of wind and waves. InflowWind input parameter PropagationDir sets the mean wind direction and HydroDyn input parameter WaveDir sets the mean wave direction.
Best regards,
Jason Jonkman, Ph.D.
Senior Engineer  National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway  Golden, CO 80401
+1 (303) 384 – 7026  Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Senior Engineer  National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway  Golden, CO 80401
+1 (303) 384 – 7026  Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

 Posts: 61
 Joined: Sat Feb 29, 2020 9:56 am
 Organization: NITcalicut
 Location: INDIA
Re: Deflection of ElastoDyn
Sir,
I have used the coupled spring model for platform model 2 in FASTv7 and conducted a nonlinear dynamic analysis for NREL 5MW offshore turbine under the action of seismic, wind& wave. I conducted a fragility analysis and calculated the fragility functions for a displacement damage state for the tower top displacement parameter TTDspFA. Likewise, I want to calculate fragility functions for other damage states such as tower failure i.e, yielding stress for the tower. So Is there a chance to get yield stress or other tower failure representing parameters in fast.
Thank you.
I have used the coupled spring model for platform model 2 in FASTv7 and conducted a nonlinear dynamic analysis for NREL 5MW offshore turbine under the action of seismic, wind& wave. I conducted a fragility analysis and calculated the fragility functions for a displacement damage state for the tower top displacement parameter TTDspFA. Likewise, I want to calculate fragility functions for other damage states such as tower failure i.e, yielding stress for the tower. So Is there a chance to get yield stress or other tower failure representing parameters in fast.
Thank you.

 Posts: 5869
 Joined: Thu Nov 03, 2005 4:38 pm
 Location: Boulder, CO
 Contact:
Re: Deflection of ElastoDyn
HI Dhaneesh,
FAST considers the mass, stiffness, and the structural response and loading of the tower, but it does not directly calculate tower yield or failure. These analyses are typically done in a postprocess of FAST, as has been discussed on this forum before, e.g., search for "yield" or "limit state".
Best regards,
FAST considers the mass, stiffness, and the structural response and loading of the tower, but it does not directly calculate tower yield or failure. These analyses are typically done in a postprocess of FAST, as has been discussed on this forum before, e.g., search for "yield" or "limit state".
Best regards,
Jason Jonkman, Ph.D.
Senior Engineer  National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway  Golden, CO 80401
+1 (303) 384 – 7026  Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Senior Engineer  National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway  Golden, CO 80401
+1 (303) 384 – 7026  Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

 Posts: 61
 Joined: Sat Feb 29, 2020 9:56 am
 Organization: NITcalicut
 Location: INDIA
Re: Deflection of ElastoDyn
Sir,
I have seen some of the topics in this forum regarding the damage of tower and monopile. For the monopile supported offshore wind turbine with foundation modeled using coupled springs under the action of combined seismic, wind & wave, does the output parameter TwrBsMyt represents the moment due to coupled seismic, wind&wave forces acting in the foreaft direction at the seabed? If so I would like to calculate the stress from the bending equation i.e, sigma = (M*y)/I. Where M= TwrBsMyt & y= outer dia/2 & I = pi/64*( D_o^4  D_i^4 ). And the yield strength of steel based on the grade of steel that was used for NREL 5MW wind turbine tower& monopile. Is this procedure which am I following is correct? If not can you suggest me the correct way for getting stress in the material?
Thank you.
I have seen some of the topics in this forum regarding the damage of tower and monopile. For the monopile supported offshore wind turbine with foundation modeled using coupled springs under the action of combined seismic, wind & wave, does the output parameter TwrBsMyt represents the moment due to coupled seismic, wind&wave forces acting in the foreaft direction at the seabed? If so I would like to calculate the stress from the bending equation i.e, sigma = (M*y)/I. Where M= TwrBsMyt & y= outer dia/2 & I = pi/64*( D_o^4  D_i^4 ). And the yield strength of steel based on the grade of steel that was used for NREL 5MW wind turbine tower& monopile. Is this procedure which am I following is correct? If not can you suggest me the correct way for getting stress in the material?
Thank you.
Return to “Structural Analysis”
Who is online
Users browsing this forum: No registered users and 1 guest