MExtreme

Discuss theory and modeling of wind-turbine structures.

Moderator: Bonnie.Jonkman

Jacob.Killerup
Posts: 59
Joined: Fri Feb 26, 2016 2:02 am
Organization: University of Southern Denmark
Location: Denmark

MExtreme

Postby Jacob.Killerup » Sun May 22, 2016 11:59 am

Hi,

I am working with the NREL 5MW turbine and have used the test18.fst file to generate an output file in FAST 8.15. I have tried running MExtreme with this .out-file, but I get an error in matlab stated as follows:

Index exceeds matrix dimensions.

Error in GrabInputFileHeaderInfo (line 44)
FileInfo.ChanNames{Ch} = temp{1}{Ch};

Error in ParseEESettingsFile (line 240)
[ FileInfo, errStat, errMsg ] = GrabInputFileHeaderInfo( FileInfo );

Error in MExtremes (line 38)
[Settings, FileInfo, EEvTable, EEvChart, errStat, errMsg] = ParseEESettingsFile(SettingsFile);

The problem is due to the .out-file, as I have no problem running the .out-files included in the Certtest folder of MExtreme.

Best regards

Jacob Pedersen
Best regards

Jacob K. Pedersen
University of Southern Denmark

Jia.Yang
Posts: 3
Joined: Sun Dec 18, 2016 6:20 pm
Organization: NPU in CHINA
Location: CHINA

Re: MExtreme

Postby Jia.Yang » Wed May 10, 2017 8:14 am

Dear Jacob.Killerup,

When I ran MExtreme, the same trouble to me.

Could you tell me how to deal with it?

Looking forward,

Yang

Satish.Jawalageri
Posts: 117
Joined: Sun May 31, 2020 4:57 am
Organization: University College Dublin
Location: Ireland

Re: MExtreme

Postby Satish.Jawalageri » Tue Dec 01, 2020 8:39 am

Dear all,

I am getting the following error when I run the mextremes_certification_tests in matlab, please can anyone advice me on this.

Code: Select all

=======
Test_03
=======

  Running MExtremes (v1.01.00a-gjh, 20-Oct-2015)

  Reading ".\Data\DLC2.3_1.out" (1.409390 MB).
    Rows=1201, Cols=133
  Done
  Reading ".\Data\DLC2.3_2.out" (1.676676 MB).
    Rows=1201, Cols=133
  Done
  Reading ".\Data\DLC2.3_3.out" (1.676676 MB).
    Rows=1201, Cols=133
  Done
Error using figure
Argument must be a Figure object or a positive integer.

Error in plot_load_cases_maximums (line 14)
hfig  = figure(44000 + iPlot);

Error in GenerateCharts (line 39)
            plot_load_cases_maximums(outputFileRoot, iChart, Settings.PlotFormat, EEvChart(iChart).absMax(goodDLCs,:), {FileInfo.DLCs(goodDLCs).DLC_Name},
            FileInfo.ChanNames(EEvChart(iChart).Chans)', EEvChart(iChart).Name, EEvChart(iChart).YLabel);

Error in MExtremes (line 114)
         GenerateCharts(outputFileRoot, Settings, FileInfo, EEvChart, ChanMinAssocValues, ChanMaxAssocValues);

Error in mextremes_certification_tests (line 42)
MExtremes( 'Test_03.mext' );


Thanks,
Satish J


Return to “Structural Analysis”

Who is online

Users browsing this forum: No registered users and 1 guest