Discuss tidal-current device design and modeling
3 posts • Page 1 of 1
- Posts: 5
- Joined: Mon Apr 16, 2018 11:22 am
- Organization: National University of Science and Technology
- Location: Pakistan
It is my first time using this software for designing small scale tidal turbine blades of 500W. I want to use NACA 63(3)-618 in my blade design. My settings in Harp_opt GUI are attached below. Now my first question is that how to use data of my own above mentioned airfoil in this software. However for now i was using default settings in Airfoil/Hydrofoil distribution, i still get error when it tries to create initial population. No feasible found. I tried this with unchecking ( hydrokinetic turbine option, to check cavitation) but still it doesn't work. So how should i apporach this or what can i change i am completely new to this. I will really appreciate if you can help.
- problems of harp_OPT.jpg (387.21 KiB) Viewed 7935 times
The airfoil files should be in the same format as WT_Perf and FAST (NWTC Library format). Modify the airfoil text files to match similar to all other NREL codes. Or just open any of the airfoil files included with HARP_Opt and replace the data with your own airfoil data (text file editor, or copy-paste Excel method).
Who is online
Users browsing this forum: No registered users and 1 guest