NuMad

Discuss tidal-current device design and modeling

Moderator: Bonnie.Jonkman

Mujahid Badshah
Posts: 12
Joined: Wed Sep 16, 2015 9:28 am
Organization: International Islamic University Islamabad
Location: Pakistan

NuMad

Postby Mujahid Badshah » Thu Sep 17, 2015 3:43 am

Dear all,
To day i have started using NuMad. I did all the steps successfully. My MATLAB Version is R2008b. when i entered numad at the matlab command prompt, it gave me the following errors
??? Error: File: NuMAD_main.m Line: 27 Column: 21
Expression or statement is incorrect--possibly unbalanced (, {, or [.

Error in ==> numad at 17
NuMAD_main(varargin{:});
I have checked the syntax and it seems ok. can any one tell me how to debugg the errors. Does it have something with the Matlab version???

Bonnie.Jonkman
Posts: 566
Joined: Thu Nov 10, 2005 10:51 am
Organization: Envision Energy USA
Location: Colorado
Location: Boulder, CO
Contact:

Re: NuMad

Postby Bonnie.Jonkman » Wed Sep 30, 2015 2:05 pm

NREL does not support NuMAD. Perhaps someone from Sandia reads these forums and can help, but I'd recommend that you first try to use the support information on the NuMAD website: http://energy.sandia.gov/energy/renewab ... ool-numad/
Bonnie Jonkman

Envision Energy USA, 2016-
National Renewable Energy Laboratory, 2003-2016

Mujahid Badshah
Posts: 12
Joined: Wed Sep 16, 2015 9:28 am
Organization: International Islamic University Islamabad
Location: Pakistan

Re: NuMad

Postby Mujahid Badshah » Thu Oct 08, 2015 5:10 am

Hi Bonnie.Jonkman
Thanks for your support. J C Berg from sandia solved my problem through email contact. The issue was actually my Matlab Version was R2008, where as Numad require R2010 or later versions.
Best Regards


Return to “Tidal Current”

Who is online

Users browsing this forum: No registered users and 1 guest