Turbine shut down operation

Discuss the theory and modeling of rotor aerodynamics.

Moderator: Bonnie.Jonkman

Jason.Jonkman
Posts: 4952
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:

Re: Turbine shut down operation

Postby Jason.Jonkman » Tue Oct 15, 2019 7:37 am

Dear Yajun,

Then I would guess you've disabled the generator degree of freedom in ElastoDyn (GenDOF), which prevents the generator-side of the drivetrain to changing speed, regardless of the applied torques. You should set GenDOF = True to allow the drivetrain to react to the changing torques.

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

Yajun.Ren
Posts: 37
Joined: Mon Jan 21, 2019 6:54 am
Organization: The University of Edinburgh
Location: UK

Re: Turbine shut down operation

Postby Yajun.Ren » Wed Oct 16, 2019 7:52 am

Dear Jason,

That works. Thank you very much for your kind help.

Best regards,
Yajun


Return to “Rotor Aerodynamics”

Who is online

Users browsing this forum: No registered users and 1 guest