Frequency 3P

Discuss field testing of turbines and structural testing of components.

Moderator: Bonnie.Jonkman

Ana.Carrillo
Posts: 16
Joined: Thu Jan 13, 2011 2:53 am
Organization: self
Location: Spain

Frequency 3P

Postby Ana.Carrillo » Tue Apr 10, 2012 1:25 am

Hi,

I,m analyzing results of field trials and I see that the pitch maneuvers are exciting the 3P frequency but I don't see this behavior by FAST.
Why I can't see it by my FAST-Simulink simulations? I'm very concerned because this phenomenon is very important and I would like to get
a reliable simulator.

Thank you,

Best regards,

Ana

Jason.Jonkman
Posts: 4171
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:

Re: Frequency 3P

Postby Jason.Jonkman » Wed Apr 11, 2012 10:49 am

Dear Ana,

I'm assuming you're referring to 3P frequencies seen in the fixed (not rotating with the rotor) frame. 3P frequencies in the fixed frame result from 1P and higher harmonic excitations in the rotating frame (a frame moving with a blade). These excitations could result from from wind shear, yaw error, turbulence, etc. If you're FAST simulation has any of these phenomenon, than you should see 3P frequencies in the fixed frame.

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov


Return to “Testing”

Who is online

Users browsing this forum: No registered users and 1 guest