Error running HydroDyn file

Discuss field testing of turbines and structural testing of components.

Moderator: Bonnie.Jonkman

Sai.Chaitanya
Posts: 5
Joined: Sun Nov 25, 2018 9:44 am
Organization: National Institute of Technology Karnataka
Location: India

Error running HydroDyn file

Postby Sai.Chaitanya » Thu Dec 06, 2018 5:40 am

Dear Dr. Jason,

I am doing project on STC platform.
I am getting problem while running the simulation and I couldn't figure out the exact reason for the error. Please guide me to solve this.
The error is as follows:
Running FAST (v8.15.00a-bjj, 12-Apr-2016), compiled as a 32-bit application using single
precision
linked with NWTC Subroutine Library (v2.08.00, 5-Apr-2016)

Heading of the FAST input file:
FAST Certification Test #24: NREL 5.0 MW Baseline Wind Turbine with OC3 Hywind Configuration,
for use in offshore analysis

Running ElastoDyn (v1.03.02a-bjj, 8-Apr-2016).

Running AeroDyn (v15.02.03, 12-Apr-2016).

Running AirfoilInfo (v1.01.00a-bjj, 5-Apr-2016).

Running BEM (v1.01.00a, 12-Apr-2016).

Running InflowWind (v3.02.00a-bjj, 11-Apr-2016).
Opening InflowWind input file: .\5MW_Baseline/NRELOffshrBsline5MW_InflowWind.dat

Reading a 10x10 grid (160 m wide, 10 m to 170 m above ground) with a characteristic wind speed
of 8 m/s. This full-field file was generated by TurbSim (v1.50, 25-Sep-2009) on 06-Dec-2018 at
16:55:23.

Processed 289600 time steps of 80-Hz full-field data (3620 seconds).

Running ServoDyn (v1.05.00a-bjj, 11-Mar-2016).

Running ServoDyn Interface for Bladed Controllers (using Intel Visual Fortran for Windows,
14-Oct-2015).

Running HydroDyn (v2.05.00, 15-Mar-2016).
Generating incident wave kinematics and current time history.
forrtl: severe (59): list-directed I/O syntax error, unit -5, file Internal List-Directed Read
Image PC Routine Line Source
FAST_Win32.exe 012B66BB Unknown Unknown Unknown
FAST_Win32.exe 012B5140 Unknown Unknown Unknown
FAST_Win32.exe 024AF672 Unknown Unknown Unknown
FAST_Win32.exe 02496C92 Unknown Unknown Unknown
FAST_Win32.exe 0244B92B Unknown Unknown Unknown
FAST_Win32.exe 0174F785 _MAIN__ 79 FAST_Prog.f90
FAST_Win32.exe 01530642 Unknown Unknown Unknown
FAST_Win32.exe 025F376F Unknown Unknown Unknown
KERNEL32.DLL 73D48484 Unknown Unknown Unknown
ntdll.dll 7743302C Unknown Unknown Unknown
ntdll.dll 77432FFA Unknown Unknown Unknown

Thank you

Best regards,
Sai Chaitanya

Jason.Jonkman
Posts: 3857
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:

Re: Error running HydroDyn file

Postby Jason.Jonkman » Thu Dec 06, 2018 7:10 am

Dear Sai,

I'm not sure. Can you attach your HydroDyn input file?

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

Sai.Chaitanya
Posts: 5
Joined: Sun Nov 25, 2018 9:44 am
Organization: National Institute of Technology Karnataka
Location: India

Re: Error running HydroDyn file

Postby Sai.Chaitanya » Thu Dec 06, 2018 11:56 am

Dear Dr. Jason,
I am herewith attaching the hydrodyn file.

Thank you

Best regards
Attachments
Hydrodyn.docx
(17.85 KiB) Downloaded 20 times

Jason.Jonkman
Posts: 3857
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:

Re: Error running HydroDyn file

Postby Jason.Jonkman » Thu Dec 06, 2018 7:44 pm

Dear Sai,

I don't see any obvious problem from my quick review of your HydroDyn input file (but it is difficult to review in MS Word format). A similar question was asked and answered in the following forum topic: viewtopic.php?f=4&t=1206&p=5199. Perhaps the same solution applies to your case?

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov


Return to “Testing”

Who is online

Users browsing this forum: No registered users and 1 guest