Page 1 of 1

UPWIND blade materials & geomtry

Posted: Thu Jan 10, 2013 7:20 am
by Eneko.Agirre
Hi everybody,

First of all congratulations for this forum, it is very useful. I am studying the deflection failure on the wind turbine blades. I have done some analysis in a concrete blade, but I'm thinking about doing the analysis of another blades. The name of the blade is:

UPWIND blade (5MW)

I have the grometry of the blade, but I haven't found the materials. It is supposed that the materials are in this article:

R. Nijssen, G.D.de Winkel, J.M. Peeringa. WMC5MW laminate lay-out of reference blade for WP3. Upwind Integrated Wind Turbine Design, 2007.

I would greatly appreciate if you could help me findin it or another way to obtain the materials.

Thank you very much in advance,

Eneko

Re: UPWIND blade materials

Posted: Mon Jan 14, 2013 5:30 pm
by Jason.Jonkman
Dear Eneko,

The UpWind 5-MW reference turbine is based on the NREL 5-MW baseline wind turbine, but the NREL 5-MW specifications as published by NREL do not contain the detailed composite layup and material properties.

I have heard of Nijssen’s paper, but I’ve not seen it available in the public domain (and I don’t have a copy myself).

There is a question regarding the NREL 5-MW blade here on our forum: viewtopic.php?f=3&t=379. In one of the posts, I gave a link to a Sandia report that talks about groups that have reverse-engineered the composite layup and material properties based on the specified mass and stiffness distributions.

I suggest you contact the authors of these studies to find the data you are seeking. If you find the information, please post a copy.

Best regards,

Re: UPWIND blade materials

Posted: Wed Jan 16, 2013 2:55 am
by Eneko.Agirre
Ok, thank you. I will ask them

Re: UPWIND blade materials

Posted: Tue Jan 29, 2013 6:27 am
by Eneko.Agirre
Hi guys,

this is a very useful link where you could find interesting information about Upwind blade materials and another interesting information!

http://www.upwind.eu/publications/3-rot ... rials.aspx

I found there very interesting information, hope you enjoy it

Eneko Agirre