I understand that if using the GPLLJ model the coherent turbulence is calculated separately and superimposed onto the background .wnd / .bts file in Aerodyn.
My question is whether is is possible to add the two files to superimpose the coherent turbulence onto the background turbulence and then create a .wnd file that can be used in Bladed?
Many Thanks
Question regarding TURBSIM coherent turbulence and .wnd files
Moderator: Bonnie.Jonkman
-
George.Elderfield
- Posts: 3
- Joined: Mon Aug 12, 2019 5:43 am
- Organization: University of Strathclyde
- Location: United Kingdom
-
Jason.Jonkman
- Posts: 5545
- Joined: Thu Nov 03, 2005 4:38 pm
- Location: Boulder, CO
- Contact:
Re: Question regarding TURBSIM coherent turbulence and .wnd files
Dear George,
A similar question was asked and answered with a tool named "CTWind", discussed in the following forum topic: viewtopic.php?f=4&t=437&p=6443.
Best regards,
A similar question was asked and answered with a tool named "CTWind", discussed in the following forum topic: viewtopic.php?f=4&t=437&p=6443.
Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Senior Engineer | National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Who is online
Users browsing this forum: No registered users and 1 guest