Add input file from Fast v_8 to Fast ver 7

Discuss the effects of turbulence on wind turbines and its simulation.

Moderator: Bonnie.Jonkman

Vahid.Fazlollahi
Posts: 17
Joined: Mon Nov 20, 2017 1:47 am
Organization: Shahid Beheshti University
Location: Iran, Tehran

Add input file from Fast v_8 to Fast ver 7

Postby Vahid.Fazlollahi » Mon Feb 26, 2018 3:16 am

Hi,
I want to use NREL 5.0 MW Baseline Wind Turbine (Onshore) Input File in FAST_v8.16.00a-bjj but this version of Fast doesn't work in my Matlab. But FAST_v7.02.00d-bjj runs on my computer. So i want add this input file into this version (FAST_v7.02.00d-bjj) of Fast.
Please, can any one help me to do that?
Thanks a lot,

Jason.Jonkman
Posts: 3753
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:

Re: Add input file from Fast v_8 to Fast ver 7

Postby Jason.Jonkman » Mon Feb 26, 2018 6:23 am

Dear Vahid,

You can find a FAST v7 model of the land-based NREL 5-MW baseline wind turbine here: http://wind.nrel.gov/public/jjonkman/NR ... nshore.zip.

Enjoy!
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

Vahid.Fazlollahi
Posts: 17
Joined: Mon Nov 20, 2017 1:47 am
Organization: Shahid Beheshti University
Location: Iran, Tehran

Re: Add input file from Fast v_8 to Fast ver 7

Postby Vahid.Fazlollahi » Mon Feb 26, 2018 7:58 am

Dear Jason,
Thanks a lot for your quick reply.
but which part of Fast, i add this folder to use in simulation,
best regards,

Jason.Jonkman
Posts: 3753
Joined: Thu Nov 03, 2005 4:38 pm
Location: Boulder, CO
Contact:

Re: Add input file from Fast v_8 to Fast ver 7

Postby Jason.Jonkman » Mon Feb 26, 2018 8:01 am

Dear Vahid,

I'm sorry, but I don't understand your question.

Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)

National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov

Vahid.Fazlollahi
Posts: 17
Joined: Mon Nov 20, 2017 1:47 am
Organization: Shahid Beheshti University
Location: Iran, Tehran

Re: Add input file from Fast v_8 to Fast ver 7

Postby Vahid.Fazlollahi » Mon Feb 26, 2018 8:16 am

Dear Jason,
I can do it,

Thanks a lot,


Return to “Inflow Turbulence”

Who is online

Users browsing this forum: No registered users and 1 guest