Dear all,
My name is Ander Aristondo and I have recently begun working with OpenFAST. I have been searching among the publicly available data, and I am unable to find the AERODYN v15 BLADE DEFINITION INPUT FILE regarding the DTU10MW reference wind turbine. Does anyone know where can I find this file?
Thank you very much!
Ander
DTU 10MW reference turbine data
Moderator: Bonnie.Jonkman
-
Ander.Aristondo
- Posts: 4
- Joined: Wed Oct 07, 2020 9:04 am
- Organization: TECNALIA
- Location: Spain
-
Jason.Jonkman
- Posts: 6075
- Joined: Thu Nov 03, 2005 4:38 pm
- Location: Boulder, CO
- Contact:
Re: DTU 10MW reference turbine data
Dear Ander Aristondo,
I know there are a couple versions of the DTU 10-MW reference wind turbine. A complete OpenFAST model of the version of the DTU 10-MW reference wind turbine developed within IEA Wind Task 37 is available here: https://github.com/IEAWindTask37/IEA-10.0-198-RWT.
The following forum topic may also be of interest to you: viewtopic.php?f=4&t=1156.
Best regards,
I know there are a couple versions of the DTU 10-MW reference wind turbine. A complete OpenFAST model of the version of the DTU 10-MW reference wind turbine developed within IEA Wind Task 37 is available here: https://github.com/IEAWindTask37/IEA-10.0-198-RWT.
The following forum topic may also be of interest to you: viewtopic.php?f=4&t=1156.
Best regards,
Jason Jonkman, Ph.D.
Senior Engineer | National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Senior Engineer | National Wind Technology Center (NWTC)
National Renewable Energy Laboratory (NREL)
15013 Denver West Parkway | Golden, CO 80401
+1 (303) 384 – 7026 | Fax: +1 (303) 384 – 6901
nwtc.nrel.gov
Who is online
Users browsing this forum: No registered users and 1 guest