Search found 6 matches

by KaMei.Chan
Thu Sep 05, 2019 7:31 pm
Forum: General
Topic: WaveTp required when wavemod = 5?
Replies: 2
Views: 2222

Re: WaveTp required when wavemod = 5?

Dear Jason,

Thank you for your help, i just key in WaveTp = 0.1 and WaveHs remains zero to bypass the error at all. Many Thanks :P

BR,
Kylee
by KaMei.Chan
Thu Sep 05, 2019 1:36 am
Forum: General
Topic: WaveTp required when wavemod = 5?
Replies: 2
Views: 2222

WaveTp required when wavemod = 5?

Dear all, I try to reach the simulation of OC4 phase1 case study with FAST 8.16, since the stream function is required for the wave condition of load case 5.6 (please find the pic. below),i generated an external wave profile by SACS for this case and set the Wavemod = 5 in hydrodyn. https://i.imgur....
by KaMei.Chan
Mon Mar 18, 2019 8:11 pm
Forum: Computer-Aided Engineering Software Tools
Topic: Parked turbine simulation
Replies: 7
Views: 2379

Re: Parked turbine simulation

Dear Jason, Thank you for your prompt reply. May i ask for your comment on the setting for parking the turbine with full-span pitch? Given the intention of FAST user guide, PitManRa and TPitManS should be set to 0 and initial&final pitch of blades should be set to 90 , what about GenDOF? is it r...
by KaMei.Chan
Mon Mar 18, 2019 3:37 am
Forum: Computer-Aided Engineering Software Tools
Topic: Parked turbine simulation
Replies: 7
Views: 2379

Parked turbine simulation

Dear Jason, I have question about the parked turbine simulation with FAST v8. I am trying to model a parked turbine with NREL 5MW Land-based (ref. to FAST CertTest 18), under constant wind speed 30m/s. Since there were many discussions about the extreme event/parked simulation in the forum already, ...
by KaMei.Chan
Wed Mar 13, 2019 8:11 pm
Forum: Computer-Aided Engineering Software Tools
Topic: configuration for LC 3.2 in OC4 Phase I
Replies: 2
Views: 1195

Re: configuration for LC 3.2 in OC4 Phase I

Dear Jason,

Thank you for your help. I run this case with 120s (the suggested simulation time is 30s but i tried to check the trend for those parametres) and it seems fitting that the result from the Rev4. report. Many Thanks!

BR,
Kylee
by KaMei.Chan
Wed Mar 13, 2019 12:25 am
Forum: Computer-Aided Engineering Software Tools
Topic: configuration for LC 3.2 in OC4 Phase I
Replies: 2
Views: 1195

configuration for LC 3.2 in OC4 Phase I

Hi all, currently i am trying to retrace the result of OC4 Phase I Rev 4 with FAST v8.16. Now i am looking for the case 3.2 described as following picture : https://i.imgur.com/2lcIL5K.png I have some questions about the configuration for this load case : 1. For the "enabled DOF" column, d...

Go to advanced search