C:\OWT\OWT\model01\DLC1.2>C:\OWT\OWT\bin\OpenFAST_x64 DLC1.2_04mps.fst
**************************************************************************************************
OpenFAST
Copyright (C) National Renewable Energy Laboratory
This program is licensed under Apache License Version 2.0 and comes with ABSOLUTELY NO WARRANTY.
See the "LICENSE" file distributed with this software for details.
**************************************************************************************************
OpenFAST-v1.0.0
Compile Info:
- Architecture: 64 bit
- Precision: single
Execution Info:
- Date: 03/29/2020
- Time: 18:04:26-0300
OpenFAST input file heading:
FAST Certification Test #19: NREL 5.0 MW Baseline Wind Turbine with OC3 Monopile RF
Configuration, for use in offshore analysis
Running ElastoDyn.
Running AeroDyn.
Running AirfoilInfo.
Running BEM.
Running UnsteadyAero.
Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 1, Blade = 1
Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 2, Blade = 1
Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 3, Blade = 1
Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 4, Blade = 1
Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 1, Blade = 2
Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 2, Blade = 2
Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 3, Blade = 2
Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 4, Blade = 2
Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 1, Blade = 3
Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 2, Blade = 3
Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 3, Blade = 3
Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. BladeNode = 4, Blade = 3
Running InflowWind.
Reading a 16x16 grid (145 m wide, 17.5 m to 162.5 m above ground) with a characteristic wind
speed of 4 m/s. This full-field file was generated by TurbSim (v1.06.00, 21-Sep-2012) on
27-Mar-2020 at 22:12:45.
Processed 13325 time steps of 20-Hz full-field data (666.2 seconds).
Running ServoDyn.
Running ServoDyn Interface for Bladed Controllers.
Running HydroDyn.
Generating incident wave kinematics and current time history.
Running SubDyn.
Calculating Internal Modal Eigenvectors
Timestep: 0 of 630 seconds.
FAST_Solution0:CalcOutputs_And_SolveForInputs:SolveOption2:SrvD_CalcOutput:Running with torque
and pitch control of the NREL offshore 5MW baseline wind turbine from DISCON.dll as written by J.
Jonkman of NREL/NWTC for use in the IEA Annex XXIII OC3 studies.
Timestep: 7 of 630 seconds. Estimated final completion at 18:12:16.
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 5, Blade = 2
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 6, Blade = 2
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 5, Blade = 1
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 7, Blade = 2
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 6, Blade = 1
FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 7, blade
2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx =
0.17203, Vy = -5.5975, rlocal = 19.938, theta = 0.17735, geometric phi = 3.1109
FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 6, blade
2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx =
-3.2084, Vy = -18.708, rlocal = 15.843, theta = 0.20037, geometric phi = -2.9717
BEMT_UpdateStates(node 7, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = -0.54159, Vy = -13.75, rlocal = 19.938, theta = 0.17737, geometric phi
= -3.1022
BEMT_UpdateStates(node 8, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 0.31486, Vy = -5.852, rlocal = 24.035, theta = 0.15728, geometric phi
= 3.0878
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 8, Blade = 2
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 17, Blade = 3
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 18, Blade = 3
FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade
2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx =
-3.4704, Vy = -18.301, rlocal = 11.744, theta = 0.23227, geometric phi = -2.9542
BEMT_UpdateStates(node 6, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = -1.2029, Vy = -14.304, rlocal = 15.843, theta = 0.20037, geometric phi
= -3.0577
BEMT_UpdateStates(node 7, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 1.0431, Vy = -8.3239, rlocal = 19.938, theta = 0.17738, geometric phi
= 3.0169
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 18, Blade = 1
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 18, Blade = 2
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 7, Blade = 1
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 8, Blade = 1
FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade
2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx =
-2.8317, Vy = -26.905, rlocal = 11.746, theta = 0.23225, geometric phi = -3.0367
BEMT_UpdateStates(node 6, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 0.10768, Vy = -23.214, rlocal = 15.847, theta = 0.20032, geometric phi
= 3.137
BEMT_UpdateStates(node 7, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 2.4836, Vy = -17.618, rlocal = 19.944, theta = 0.17728, geometric phi
= 3.0015
FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade
2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx =
-4.1183, Vy = -39.535, rlocal = 11.747, theta = 0.23226, geometric phi = -3.0378
BEMT_UpdateStates(node 6, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = -0.78735, Vy = -34.614, rlocal = 15.847, theta = 0.20033, geometric
phi = -3.1188
BEMT_UpdateStates(node 7, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 2.0564, Vy = -27.582, rlocal = 19.944, theta = 0.17729, geometric phi
= 3.0672
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 17, Blade = 1
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 19, Blade = 1
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 9, Blade = 2
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 5, Blade = 3
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 6, Blade = 3
FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade
2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx =
-2.4075, Vy = -33.486, rlocal = 11.746, theta = 0.23226, geometric phi = -3.0698
BEMT_UpdateStates(node 6, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 0.31288, Vy = -27.859, rlocal = 15.846, theta = 0.20034, geometric phi
= 3.1304
BEMT_UpdateStates(node 7, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 2.8795, Vy = -20.437, rlocal = 19.944, theta = 0.17731, geometric phi
= 3.0016
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 16, Blade = 1
FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 2, blade
2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx =
3.40405E-02, Vy = -26.971, rlocal = 2.864, theta = 0.23227, geometric phi = 3.1403
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 17, Blade = 2
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 14, Blade = 3
FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade
1):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx =
11.053, Vy = -52.422, rlocal = 11.747, theta = 0.23229, geometric phi = 2.9338
BEMT_UpdateStates(node 9, blade 1):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 1.5709, Vy = -11.417, rlocal = 28.131, theta = 0.13632, geometric phi
= 3.0049
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 9, Blade = 1
FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade
1):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx =
9.2715, Vy = -56.386, rlocal = 11.746, theta = 0.23228, geometric phi = 2.9786
BEMT_UpdateStates(node 6, blade 1):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 7.7449, Vy = -47.927, rlocal = 15.846, theta = 0.2004, geometric phi =
2.9814
BEMT_UpdateStates(node 7, blade 1):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 5.4604, Vy = -38.213, rlocal = 19.941, theta = 0.17743, geometric phi
= 2.9997
BEMT_UpdateStates(node 8, blade 1):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 2.5407, Vy = -26.769, rlocal = 24.037, theta = 0.15738, geometric phi
= 3.047
BEMT_UpdateStates(node 9, blade 1):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = -0.5906, Vy = -12.751, rlocal = 28.132, theta
FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade
1):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx =
8.1188, Vy = -41.399, rlocal = 11.745, theta = 0.23227, geometric phi = 2.9479
FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade
2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx =
0.31334, Vy = -35.571, rlocal = 11.749, theta = 0.23221, geometric phi = 3.1328
BEMT_UpdateStates(node 6, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 1.9428, Vy = -30.213, rlocal = 15.852, theta = 0.20022, geometric phi
= 3.0774
BEMT_UpdateStates(node 7, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 3.516, Vy = -23.847, rlocal = 19.951, theta = 0.17708, geometric phi =
2.9952
FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade
2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx =
-1.252, Vy = -44.392, rlocal = 11.749, theta = 0.23222, geometric phi = -3.1134
BEMT_UpdateStates(node 6, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 1.1853, Vy = -38.726, rlocal = 15.851, theta = 0.20024, geometric phi
= 3.111
BEMT_UpdateStates(node 7, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 3.4713, Vy = -31.624, rlocal = 19.95, theta = 0.17712, geometric phi =
3.0323
FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade
2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx =
-0.95972, Vy = -34.984, rlocal = 11.748, theta = 0.23223, geometric phi = -3.1142
BEMT_UpdateStates(node 6, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 0.58679, Vy = -29.652, rlocal = 15.85, theta = 0.20027, geometric phi
= 3.1218
BEMT_UpdateStates(node 7, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 2.4104, Vy = -23.281, rlocal = 19.949, theta = 0.17716, geometric phi
= 3.0384
FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade
2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx =
1.8152, Vy = -11.872, rlocal = 11.748, theta = 0.23223, geometric phi = 2.9899
Timestep: 8 of 630 seconds. Estimated final completion at 18:14:35.
FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade
1):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx =
15.634, Vy = -74.613, rlocal = 11.746, theta = 0.23228, geometric phi = 2.935
BEMT_UpdateStates(node 9, blade 1):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 3.8709, Vy = -28.627, rlocal = 28.135, theta = 0.13609, geometric phi
= 3.0072
Warning: Turning off Unsteady Aerodynamics due to high angle-of-attack. BladeNode = 10, Blade = 1
FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade
1):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx =
13.119, Vy = -58.79, rlocal = 11.745, theta = 0.23228, geometric phi = 2.922
FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade
2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx =
2.0281, Vy = -11.253, rlocal = 11.747, theta = 0.23225, geometric phi = 2.9633
BEMT_UpdateStates(node 6, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 1.4203, Vy = -9.8273, rlocal = 15.847, theta = 0.20031, geometric phi
= 2.9981
FAST_Solution:FAST_AdvanceStates:AD_UpdateStates:BEMT_UpdateStates(node 5, blade
2):BEMT_UnCoupledSolve:There is no valid value of phi for these operating conditions: Vx =
-1.0336, Vy = -41.59, rlocal = 11.746, theta = 0.23226, geometric phi = -3.1167
BEMT_UpdateStates(node 6, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = -0.31393, Vy = -39.489, rlocal = 15.845, theta = 0.20034, geometric
phi = -3.1336
BEMT_UpdateStates(node 7, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 0.71932, Vy = -35.142, rlocal = 19.941, theta = 0.17731, geometric phi
= 3.1211
BEMT_UpdateStates(node 8, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 1.682, Vy = -27.2, rlocal = 24.039, theta = 0.15718, geometric phi =
3.0798
BEMT_UpdateStates(node 9, blade 2):BEMT_UnCoupledSolve:There is no valid value of phi for these
operating conditions: Vx = 2.537, Vy = -17.185, rlocal = 28.137, thet
FAST encountered an error at simulation time 8.02 of 630 seconds.
Simulation error level: FATAL ERROR
Aborting OpenFAST.